Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / April 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Temperature sensor not working17 Apr 2005 14:34 GMT2
Any advice on how to activate the temp readout on the rear view mirror. The
compass reads just fine. I cannot find the sensor or a fuse. Thanks for the
fix.
Headlight Condensation / Blower Fan17 Apr 2005 05:20 GMT3
Hey All,
I have a 2003 Chevy 1500HD Crew. Took the truck into the dealer due to a few
small items such as one headlight that had persistant Headlight
Condensation. They replaced the unit with a new unit (I saw the replaceing)
questions about a '92 1500 @ 360k km's16 Apr 2005 19:44 GMT5
Im looking around at adding a "new" truck to the family currently I have
found a 92 1500 extended cab (this is a must) with 360,000 km's on it, just
wondering what I should be watching out for or looking for IF I go to see
the truck?  What sort of drivetrain problems could this ...
99 GMC Yukon - Blown ECM 1 fuse16 Apr 2005 17:09 GMT3
I have a 99 GMC Yukon. The ECM 1 fuse blows every couple of weeks. I
replaced the fuel pump at the suggestion of my mechanic, yet I am still
having problems with the fuse blowing while driving down the road every so
often. Any ideas?
99 GMC Yukon - Blown ECM 1 fuse16 Apr 2005 17:09 GMT1
I have a 99 GMC Yukon. The ECM 1 fuse blows every couple of weeks. I
replaced the fuel pump at the suggestion of my mechanic, yet I am still
having problems with the fuse blowing while driving down the road every so
often. Any ideas?
1988 Chevy Pickup bucking problem16 Apr 2005 01:29 GMT3
88 Chevy PU 350V8, 5spd. What would cause a bucking problem? This
usually only happens when I'm going up a steep grade on the highway.
The truck will be running fine, I'll hit a steep hill and it will start
to buck. Could it be a timing problem? Or what else would cause this
Vacuum gage16 Apr 2005 01:21 GMT2
Is it a big job to add a vacuum gage to my 2000 S-10 with
V-6? Where do I pick up the vacuum on the engine? Thanks
Signature

b

No S-10 no Blazer?15 Apr 2005 22:54 GMT1
if the S-10 was canceled to make way for the Canyoado(Colorado/Canyon)then
what about the blazer?
sterring15 Apr 2005 21:40 GMT5
2005 chevy 2500 H D duramax. Had steering    gear box replaced,I have
excessive play in steering wheel, can this be adjust  to take the play out
of the steering.
'96 Silverado 30515 Apr 2005 10:31 GMT7
The Radiator blew. Should I just buy a new one (about $400.00) or have
my old one repaired?
Has anyone had theirs fixed? Does it last?
Because I live in Florida I took my thermostat out a few months ago. It
1997 Silverado Timing15 Apr 2005 02:25 GMT12
i rebuilt my motor on my truck and the check engine light is on and the code
is 1345
i asked someone what to do they say set the timing and they would do it for
30 bucks!
Fuel Inertia Switch ?15 Apr 2005 01:50 GMT7
Can some one tell me where the fuel pump cutout switch is located on
1988 S-10 Blazer 4x4 4.3 L.Thanks Bobby
1993 chevy S-1014 Apr 2005 19:53 GMT1
i have had the coil checked and the (ESM) it was good there is no
spark any ideals??????
Signature

Posted using the http://www.autoforumz.com interface, at author's request

LED Tail light kit14 Apr 2005 12:53 GMT12
Anyone have information on a vendor of a kit to convert conventional
bulb rear lighting to LEDs for my '98 Chev Tracker? Aftermarket parts
suppliers don't got, but I think that there may be someone who's made up
something for this since I located such a kit for my motorcycle to
1984 gmc jimmy14 Apr 2005 06:04 GMT3
has a cold start problem and does not give any codes it has been to two
shops and they cant figure it out need help trying to trouble shoot it
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 March, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.