| Thread | Last Post | Replies |
|
| Help, CKP/CMP Correlation code P1345 | 14 Apr 2005 05:01 GMT | 18 |
My local mechanic repaired my intake manifold gaskets (leaking coolant) and did a nice job 'cept for one problem...the Service Engine light is on and is getting the "P1345" manufacturer code. Anybody know what happened to cause this CKP/CMP Correlation code?
|
| how can i lift my truck without spending alot of money | 14 Apr 2005 04:14 GMT | 14 |
i plan on put 22 inch wheels on the truck so i just want to lift a lil bit
|
| Horn - No Workie | 13 Apr 2005 21:34 GMT | 2 |
Hey All, Forget this very important item. My horn never works when I need it. If I play with it and press with different pressures and areas it will eventually work/blow. This is pretty critical as I seem to run across a lot of asleep
|
| Another 94 suburban question | 13 Apr 2005 17:49 GMT | 2 |
My suburban has been in the shop for about a month. I just had a new motor put in it. the problem is that when they hookup the battery the motor tries to turn over. Is there a common point at which wires could be crossed that would cause it to do that?
|
| 1965 Chevy PU | 13 Apr 2005 03:42 GMT | 1 |
My neighbor has a 1965 Chevy V-8 that he has been having problems starting .I believe he has checked everything .I tried to help him with ideas that we agree on.I came into the picture 6-7 days after he started working on the problem.Finally last night he got spark.Almost everything ...
|
| Vous cherchez des pi?ces de v?hicule ? bon prix ! | You are looking for vehicle part at good price! | 13 Apr 2005 03:18 GMT | 1 |
English message follows. ---------------------------------------------------------------------------- Vous cherchez des pi?ces de v?hicule ? bon prix ! Plus besoin de perdre votre temps en:
|
| wiper circuit | 13 Apr 2005 02:19 GMT | 2 |
After doing a visual inspection of my 93 circuit board, I simply cannot see any bad solder joints on any connector or board locations. So which ones should hit with the solder gun and which ones should I avoid? Thanks
|
| Head Unit | 13 Apr 2005 02:04 GMT | 3 |
I am looking for a wiring harness for a Dual xd-7500 head unit , that will work in my Chevy Trailblazer 2004 . Any idea where I can get this .
|
| Chevy Tahoe Message Board | 12 Apr 2005 06:34 GMT | 2 |
There is a good message board and website that is designed just for the Chevy Tahoe. You might be able to find out some information at that site. It's http://www.chevytahoeclub.com.
|
| Fuel tank question | 12 Apr 2005 05:42 GMT | 2 |
I have one I have never seen. I have a 91 suburban with 150k on the clock (fuel pump, tank and lines original). This last weekend I noticed tar dripping from the gas tank. It appeared to be running down from the top of the tank. The truck is not undercoated, does not smell ...
|
| 89 3/4 ton Silverado engine dies | 12 Apr 2005 03:58 GMT | 2 |
I have a problem with my motor dying....its a 5.7 TBI. It runs for about 3 minutes then dies.......then it won't start for 10 minutes.......then runs for 3...so on. I replaced the fuel filter....that didn't help........I replaced the map sensor and that didnt help. It seems to ...
|
| Towing with a GMC Canyon | 12 Apr 2005 02:50 GMT | 5 |
I have ordered the gear to fit out my 2wd Reg Cab 2.8l I-4 Canyon for towing, and wanted to get some feedback. I will not be doing regular or frequent towing, but this summer I do need to rent a U-Haul and make a 3,600 KM round trip over hilly terrain along the
|
| 1989 Chevy Silverado Brake Lights | 12 Apr 2005 01:35 GMT | 3 |
Both of my brake lights went out at the same time. I've put in new bulbs but it still does not work. Anyone familiar with this problem and how to fix it?
|
| speed sensitive steering | 11 Apr 2005 22:04 GMT | 7 |
'97 Sierra Z71 Is there anyway to disable 'speed sensitive steering', and leave just plain old power steering? Thanks.
|
| LOW vacuum | 11 Apr 2005 14:01 GMT | 6 |
'87 Chevy G20 Van At Idle, I have about 19-20 inches of vacuum...running down the road at 50-60 there is about 9! as soon as a mild hill is encountered, 3 inches of vacuum! It pulls the hill with little loss of speed.
|