Well, after owning my 1988 Suburban for 12 years, I am thinking about
retiring it and get another Suburban 4WD.
I would like some opinions from someone that actually owned or drove the 99s
and 00s.

 Does anyone know of a good site that has older parts? I`m looking
mainly for interior stuff.
The car is a 1980 Chev Malibu 2 door.
Thanks

I have a 2004 GMC sierra 4x4 truck that was bought off the lot without
cruise control. Does anybody put together a factory kit for sale?

My father, an electrician, drives a 1998 Chevy Express 1 ton.  It started
sputtering on the way to work about a week ago, and on the way home we
were barely able to coast into a PepBoys.  It's still there, and they've
run a diagnostic test.  The codes they gave us are (and sorry if ...

I have a 2004 GMC sierra 4x4 truck that was bought off the lot without
cruise control. Does anybody put together a factory kit for sale?

I have a stock 1994 GMC K1500 350 TBI with stock air cleaner assy/box, dual
studs for hold down and the plastic ring with hose connection for the
crankcase ventilation connection on the top of the valve cover.
Question:  Is there a replacement assembly made to replace the stock ...

So I took my 91 extended cab 2wd to the stone quarry and loaded it up with
2000 lbs of stuff.  Got it home fine, although the front end was a little
light.  The springs in the rear are completely flat.  Did I do any damage to
anything?

I am looking for a MANUAL Steering box for a 1978 4x4 Chevy pickup.  It has
Power sterring, but we need a Manual box.  We use the Truck for Mud Bogging
only.

anyone have any early thoughts about the H3 based on the picture and the
powertrain?
i have heard they will use a 5 or 6 speed and the inline 5 from the colorado
i myself say if it is better then the H2 it might be worth gettin i mean the

1996 Chevy Blazer 4x4 S-10 Vortech v-6
Quick question!
First... This is my truck...
http://www.ledamay.com/blazer/big.jpg

 A friend recently purchased a cold air injection system for his 04 Chevy
p/u. I've done some research on cold air systems (they all seem to claim
1.5 - 3 mpg increase) and ask the group if this seems within the limits of
possibility? The theory makes sense, it's the actual ...

I have a stock 1994 GMC K1500 350 TBI with stock air cleaner assy, dual
studs for hold down and the plastic ring with hose connection for the
crankcase ventilation connection on the top of the valve cover.
Question:  Is there a replacement assembly made to replace the stock closed ...

GMC Sonoma 1995 4 cyl.
I get a complete electrical shut down glitch
while driving.  Sometimes it's very fast just the radio goes
out, and sometimes the whole truck shuts off.

I have a alert code that says (catalyst efficiency below threshold bank
1&2) anyone have a answer to what to change.

I have a 95'k2500 with the 454 engine. My radiator has developed a small
leak. My question is can the "plastic" radiators be repaired? It looks like
the leak is around where the tank meets the core. Thanks all!!