Today I got a recall for my '03 Silverado, 4.3L V6 forignition distributor
cap and rotor that may corrode. Anyone else get this??
When will it ever end!!
V.B.

I am looking into buying A 1993 5.7L v8 Silverado K1500 that has the
factory towing package. I need to tow a horse trailer with GVWR of
7,000 lbs. The trailer in question is a 2000 Thurobilt SE and has a
hitch weight of 375 lbs.

I know this is not just a 4X4 question...but I got stuck parking under a
pine tree which dripped...made worse by 70+ degrees all day for a week...the
pitch is very hard and will not come off..  I am worried about damaging the
paint, bug/tar off product is not doing anything.  Any ...

Any suggestions as to the best way to tackle this.  I gather I have to drill
out the rivets holding in the original ball joint. What size of drill bit
should be used? Is it better to just gring the rivet heads off? Is this a
job for a reasonably competent home mechanic or should I ...

Hello Group,
I have a '96 S-10 w/ the 4.3L 4x4 and a manual transmission. Sometimes when
I take off from a stop it snaps out of first gear. Very hard in fact that
sometimes it goes into second. It is totally random one day it did it three

My low beam headlights suddenly stopped working ('96 Tahoe). They still
work for the daylight running lamps though, so bulbs are OK. High beams
are OK too.I'm assuming the dimmer switch is the problem, but any advice
would be appreciated.

SAT I had a fuel pump replaced... I was working nights last week.. Go in at
7P off 7A..
I went to eat with family, I meet them there..
Came out got in truck and no head lights.

When in two wheeldrive the driveshaft going too the front turns. When I put
in 4wheel it doesn't move, so the tranfer case should be ok right? Is there
away to check the front axle, or something else I should check. There was
no loud bang or again thing it just won't engage into ...

is it normal for my truck to be hard to turn in four wheel drive.  which
ever way i try to turn the steeering wheel wants to pull the other way.
also how fast do u have to be going when u let off the accelerater to take
it out of four wheel drive. auto locking hubs of course

If I wanted to buy a new crate transmission for my 91 2wd Silverado with the
5.7L automatic, does anyone know what part number that would be?  My truck
has 257xxx on it and the tranny has been rebuilt twice.  Think the next time
I will go with a new GM crate tranny.

Can someone tell me why my temperature is reading 0C.  It recently gave me
a temperature but here in the last three days it just reads OC

today I took my B-day money and picked up a 10" Edelbrock air
cleaner.. the 14" has too deep of a dish to work on my '88 K2500,
TBI350.  I took it and found the biggest 10" air filter the store had
(Fram CA126.. I think, about 4" tall).  I removed the PCV spacer on

hey its me again. i have an 85 s-10 with the 1.9 in it. i want to put
an aftermarket coolant temp gauge in it, but i have never done that
before. the coolant temperature sensor in the intake manifold is a
two-wire connection. the guy i bought the truck off of swapped heads

I'm looking at the 6,2/6.5 diesel as a transplant option into a Toyota
T100 truck.  Got a few questions if you pros can spare a minute:
1. What is the total weight of a 6.2/6.5 diesel ready to run (with
alternator, starter, injection pump, etc.?  Do these engines have a vacuum

I just recently bought a tonneau cover for my truck.  The brand name is Omar and it is a soft snap
cover for a chevy sportside vehicle.
does anyone know of a website that offers there products or at the very least a website for the
company itself or a phone number I can call?