I have a 98 k3500 with an oscillating fuel gauge.  For example when the
indicator shows 3/4 of a tank the needle will oscillate from about 5/8 of a
tank to 7/8 of a tank.  I am guessing at the rate of oscillation but would
say it oscillates at about 15hz.  I have owned the ...

I was in The GM Dealer this week and he was saying that Gm are linking the
Allison 6 speed (automatic) transition to the 6.6 duramax diesel for 2006.
Is this a good match.What is the difference between the 5 and the 6 speed.
Is it a change in the mid range gears or is it just an ...

Anyone Know where I can Purchase The Front  Cab mounts ( sheet Metal).
For an 89 s-10?
I am Changing out The Cab,  and I have a perfect replacement Cab ,
Except that the Front Body Cab mounts are Rusted out . The rest of the

Does anyone know how to bypass the column to start an 84 S10 I have
trouble starting the truck with the key. It works when it wants. I had a
similar problem with my Iroc so I changed the column. I would like to
put in a starter button on the truck instead. How can I do this, and

The rivets holding the upper ball joint on my 90 4x4 were a bear to get out.
The upper control arm is tubular instead of stamped... I think it's that way
on all 4x4s in that model range (88-98)?  Guess the extra thickness made
them harder to get out.

I have a couple of problems that I need some help me with. One, is just a
part wearing out, but I simply can't locate the offending part. The other,
I'm certain, is a dealer induced problem, that I'm not able to trace, and am
not willing to pay the dealer to fix something he ...

I'm wanting to do some bodywork/painting on my old '86 Silverado, and
was thinking about building a (for my use only) sandblaster.
Does anyone know of a site that walks one through building their own...
and also where to find the uncommon parts?

This truck runs smooth except between 35 and 42 mph at which speed there is
a vibration. Anybody have an idea? Thanks

1990 GMC K-1500 Sierra XC
Loosened the 9mm bolt that clamps the coupler to the shaft out of the
steering box, but wasn't able get the coupler off the steering box shaft.
Tried prying, but the rag joint was absorbing all of the movement.  The

I was reading an article, till now, I thought you could only get the 180 hp
version of the 4.3 Liter in the 4x4 version S-10's and Sanoma, but I was
wrong, can I take the ecm under the hood from a 4x4 and hook it into a 4.3
Liter in a 2wd pickup? Would it work, if I tired it, is ...

Anyone know where I can get a diagram for which wires are which for a '97
Blazer for the trailer lights. There are so many back there I don't even know
where to begin!

Previously I posted this:
"This is an '85 K5 6.2L diesel Blazer. Both batteries are very new.
Now backing up a bit. In the winter when temps linger around 28-40 overnight
on the average, every morning on my way to work when I turn the ignition and

Please post experiences you have had in dealing with RV Shield Insurance or
Extended warranties for Heritage Insurance.  I am compiling a list after my
bad experience with them.  I do know that they refused to even discuss a
case where they denied coverage with Trailer Life ...

I have a 2001 Jimmy SLE with 46,400 miles.
Today while getting on the highway with four people weighing in at 550 lbs
and 75 lbs of additional load I accelerated from about 35 to 70 and the
service engine soon light came on and flashed on an off for about one minute

The title says it all but I noticed when I was fourwheeling I only have the
front drivers side and the back passenger wheel was turning. A guy told me
about something that I a.s to my differential and both wheels will turn. I
can't believe all the parts are there and they never ...