I have a 4WD blazer and I was wondering in changing the rear rotor is the
rotor part of the large hub in the middle or is it just sitting around
it.And if so what is the best way for removing it so that I dont cause any
damaged to surrounding parts.any help would greatly be ...

Hi all,   Lately when driving down the road in my 1998 Blazer my air bag
warning light will come on for no reason at all. It will stay on for maybe
15 seconds or so & then go off.  It's done this 3 or 4 times a day & then
other times it won't do it for a couple of weeks.  Any ...

in my 93 jimmy (4.3 liter), it shifts hard from first to second gear. Then
all of the other gears are fine. I was told it could be a bad universal
joint, but thats not it. Today i got the transmission pressure checked,
and it was high. I think there is a computer in there for the ...

It seems as if my 92 suburban is having some hesitation issues at idle and
occaisonally on take off.  It's not happening all the time, I just started
really noticing it yesterday while sitting at idle.  It seemed to idle low
(maybe 500rpm +/-)and I thought i kept hearing a ...

When I use the squirter function on the wipers, they don't always park
right. Sometimes they won,t turn off when they are supposed to

I have a 96 chevy express van with the 350 and about 150k miles.
Yesterday, I went out to start it and noticed that it was running
rough, like one of the cylinders wasn't firing.  It ran though.  Then I
got a code.  The code reader says "multiple random cylinder misfires".

I have a 98 Suburban with a front bench seat.  Lately the front passenger will not stay in the locked position.  Is there a part in the seat I can replace?  How difficult is it?  If I took for repairs, do I go to a body shop, or an upholstery shop?
Hope someone can help...

using standard size original steel 15 inch wheels or do you think these are
too big for these wheels?

Looking at a new Chevy Duramax with trailer package.  I see it has the
receiver and 7-way round plug, but does it come with a brake controller
built in somewhere?

Anyone ever seen a plugged a/c evaporator on a 95-97 S-10? How hard is it to
get it apart to clean it?

I have never had any good luck with the automatic adjusters on drum brakes on any vehicle. All
the brake hardware on this truck was replaced by me about 2 years ago. Everything was installed
as per the official big $ GMC manuals. The threaded adjusters don't screw out to keep the ...

I have a 03’ Tahoe with 33,000 miles on it. It has been running great
until the other day when I was driving home, go about 40mph. A warning
flashed "reduced engine power" and the truck slowed to 10 mph.  The
check engine light also came on.  

Does anybody have this setup?  GM site let's me build it, but I'll be darned
if I've ever seen one on a lot.  Seems like all the 1/2 ton crews have
3.42's in them.  Just curious about the performance with this rearend.

Ok, I have googled this subject and came up with about 4 really good
responses, problem is, all have different ways on doing it.
This is my first time in about 10 years doing my own brakes.  First
time ever on a 4x4.

Me and my dad are building/restoring a pickup truck. He has a title
and most all of the pieces for a 73 chevy. Expectedly, the cab is
rusted beyond repair. So we are building this from two different
trucks. We are using the body from an 81 he has, and everything else