| Thread | Last Post | Replies |
|
| 92 blazer s-10 4x4 | 18 Jul 2005 02:35 GMT | 5 |
Please help :( I have a 92 4x4 s-10 4.3 l blazer.I rarely have used the 4x4 feature,i tried the other day and i heard a humming like it wasn`t shifting from 1 st gear in 4x4 mode only ,is that normal?should it go thru all gears while in 4x4?In
|
| Ford Chevy or Dodge 1 ton diesel dually | 17 Jul 2005 21:05 GMT | 2 |
I am trying to decide which truck to go with and was hoping I could get some advice from the group. Are there any advantages or disadvantages to any of the diesel engines offered by the different mnufacturers?
|
| conversion to 5 lugs | 17 Jul 2005 20:55 GMT | 2 |
I have a 1972 C20, that I am restoring/rebuilding/modifying. In the process, I want to convert the 8 bolt setup of the wheels and axles to 5 or 6 bolts. Looking at the service manual, it seems that changing the front end would be
|
| a/c | 17 Jul 2005 17:41 GMT | 1 |
i have a 96 s10,air is cool,but does not come out of vents,someone said it has to do with vaccum lines,is this true?how do i repair?thank you
|
| wiper cuircuit board | 17 Jul 2005 17:37 GMT | 9 |
someone said that board is located on firewall,is that on the engine side or inside cab under dash?
|
| Wipers Won't.......sometimes | 17 Jul 2005 06:03 GMT | 2 |
I have a '95 LWB Chevy Cheyenne PU with cruise control that has never worked correctly since purchase in '96, and for the last couple of years, the wipers only come on when they "want" to. Both controls are on the turn signal. Apparently a loose connection somewhere, but any
|
| Toque specs for 1999 350 vin r | 16 Jul 2005 21:45 GMT | 1 |
does anyone have torque specs for a 1999 350 sb need mains, rods, heads, oil pump, intake. thanks, Rex
|
| transmission Cooler K1500 | 16 Jul 2005 20:24 GMT | 1 |
Ok here is the subject vehicle.... 1992 K 1500, 350 Engine, 7004R Transmission. Looking to install an external transmission cooler to work in conjunction with the OEM radiator transmission fluid cooler.
|
| 79 C10 won't crank | 16 Jul 2005 19:43 GMT | 1 |
I have a 1979 Chevy C10 Silverado 2WD with a 350 Gas V8 4bbl carb and automatic tranny. Last week It wouldn't crank. My dad and I have tested the starter it was fine, we replaced the starter
|
| 1997 Chev pickup Windshield wiper problem | 16 Jul 2005 11:04 GMT | 1 |
Does anyone know why they don't always stop at the home position
|
| TBI Rebuild | 16 Jul 2005 04:07 GMT | 4 |
Does anyone have an illustrated parts breakdown on a TBI 220 unit that is on my 1994 GMC K1500 4X4 350 AT? Is this only available in the rebuild kit itself? Casting number on body is #17093030. Also was wondering if anyone had a decent source to buy injectors for same at a ...
|
| fuel pump? | 16 Jul 2005 01:53 GMT | 2 |
On my 91 chevy S10 when I get to about a quarter of a tank my truck will want to stop running and it will and the steering wheel will lock up and the whole 9. then i start it back up and it will go for a couple minutes and then do it all over until i get to a gas pump. Do you think ...
|
| PING: Marshmonster | 15 Jul 2005 19:17 GMT | 2 |
You out there ya' crazy drunken bastard?! Doc
|
| Hot Start Problems | 15 Jul 2005 08:28 GMT | 11 |
My 1984 Chevy 1/2 ton 4x4 will not start after the engine gets hot. It is a 5.7 liter. The starter will not crank the engine. I have replaced the starter (twice), alternator and battery to no avail. Can someone help me solve this problem?
|
| Need to change brake lines | 14 Jul 2005 12:43 GMT | 5 |
I have a 2000 1500 Silverado 2wd. I have installed a 3 inch spindle lift. I want to replace my brake lines with SS ones. The driver side line is a little short too. Any recommendations? I would like part numbers if you have them or links.
|