| Thread | Last Post | Replies |
|
| SPECS of Sensors | 01 Sep 2005 00:03 GMT | 6 |
I have a 94 chev 1/2 ton 305 TBI that is failing the emission tests. Any info on the sensors, ohms readings or voltages would be appreciated for the EGR solinoid, the ohms for each injector, and anything else that would cause a VERY rich mixture in the TBI. Knock sensor tests ok ...
|
| Boilin???? | 31 Aug 2005 23:40 GMT | 3 |
When I turn off my truck it sounds like something is boiling. It seems to me that it is coming from the exhaust pipe right around the passenger side of my truck. Anyone have any ideas. Also sometimes my ac will just stop running all of a sudden out of no where. Maybe
|
| brake pedal too hard | 31 Aug 2005 23:40 GMT | 2 |
my chevy s-10 blazer(4.3 ltr.) brakes just got real hard to push, with very little power. I looked into replacing vacuum hose and check valve, but it comes up as "not necessary" or N/A. Is it probably the booster???
|
| Front Defrential Problem 97 K1500 | 31 Aug 2005 23:31 GMT | 1 |
The passenger side bearing on the front deferential of my 97 K1500 seems to be going out. When I rotate the passenger side front tire (after freeing up the disk brake) I can hear a grumble and when I fell around, it seems to be coming from the end of the extension tube on passenger ...
|
| Silverado 1500/Towing Harness | 31 Aug 2005 23:15 GMT | 3 |
I'm picking up my 2005 Silverado today.. After the test drive I looked near the back bumper to make sure it was wired for towing and I saw the wire bunched up under there but forgot to see if it had a connector or if it is just bare wires. Do these trucks usually come with a
|
| Cap Installation instructions needed. | 31 Aug 2005 19:55 GMT | 1 |
Just bought a used Century fiberglass truck cap. Trying to find detailed installation instructions. Yes, it seems like a no brainer but I'm sure there are accepted "correct" procedures for installing a cap. I would also appreciate information on the wiring necessary to add
|
| '81 Custom Deluxe V6--230 cu.in. ? | 31 Aug 2005 12:16 GMT | 5 |
May be looking at a '81 Custom with a V6 that's supposed to be around 230 cu.in., does this sound about right on the size? The guy said it has a 'four in the floor', but keeps going on about some overdrive non-sense... they did have 4-speed sticks that yr, correct?
|
| stinky AC | 31 Aug 2005 11:16 GMT | 7 |
How do I get rid of the horrid smell in my air conditioner?! I've tried changing the cabin air filter, but that didn't help at all....may have made it worse.
|
| broke bolt | 31 Aug 2005 02:45 GMT | 17 |
I have an 87 chevy 4x4 with manifold bolt broke off in the head very back left hand side. Will
|
| 95 S-10 turn signals? | 30 Aug 2005 17:44 GMT | 3 |
OK here goes, my trucks signal lites dont work only once in a while. My hazard signals {all 4} work just fine,but the turn signals are spooky. If I put the two front signal bulbs in the front lites the arrows come
|
| Truck Bed Liners | 30 Aug 2005 07:10 GMT | 5 |
Can anyone give me advise on the best truck bed liner? I know this is a little out of the ordinary but we have a 25 year old Terry 5th wheel camper that is absolutely beautiful on the inside but leaks like you wouldn't believe. I've tried the kool seal etc with no luck. I'm
|
| lockable Tonneau and ladders on silverado | 30 Aug 2005 04:42 GMT | 3 |
Hello - is there such a thing as a lockable Tonneau / ladder rack combination for a Silverado? I have a 2000 Silverado ext cab flare side. I do not think I want a cap due to storage issues when I am not using it. How do you handle bed storage security on trips? Things like chain ...
|
| Silverado 1500/Wire Routing | 30 Aug 2005 04:38 GMT | 3 |
I will be picking up my new Silverado 1500 on Monday. I have to route some antenna wire (XMRadio and GPS receiver antennas) out the back of the cab somehow. What is the lowest profile way to get these antennas out and on top of the cab? The truck will be a lease so I can't
|
| 1996 chevy lumina van | 30 Aug 2005 01:34 GMT | 1 |
my van runs good for a few days then it starts sputtring like it isn't getting any gas. I let it sit for a few hours and its ok for a week or so. could it be my fuel filter.
|
| Rough running 93 Blazer. | 29 Aug 2005 22:46 GMT | 2 |
We have a 93 S10 Blazer with a V6 that started running very rough. The mechanic tossed money at it in the form of new plugs and wires. It didnt help in any way. The cat convertor has been checke and is clear. It has about 115K miles. He THINKS it might be a gasket or injectors ...
|