| Thread | Last Post | Replies |
|
| 2003 4WD trailblazer knocking | 27 Aug 2005 19:10 GMT | 9 |
I took my trailblazer to the dealers to get a few things straightened out, The back panel around the license plate rubber gasket was pulled in, probably installed too tight. they installed a new seal, problem taken care of. I also told them of an engine knock, sounds bad
|
| Which strong 10 ply tires for Chevy Cargo Van ??? | 27 Aug 2005 18:31 GMT | 7 |
Looking for strong sidewall tires , 10 ply, for 1 ton Chevy Cargo Van . Dont care about price too much...just want super strong tires. Recommendations ????
|
| Plow prep Vs Tow Prep | 27 Aug 2005 15:02 GMT | 1 |
I just purchased a 2005 GMC Sierra 1500 4X4 W/5.3L and was told I had a plow prep package on it. I know I have the Tow prep. I guess my question Is a tow prep the same as a plow prep. If not what are the differences.? I have tow/haul on the shift colom. My factory assembly
|
| Buick 1999 Regal Fuse Location | 27 Aug 2005 13:48 GMT | 1 |
Please does anyone know where the fuse is located in a Regal 99. I heard there is another fuse Box apart from one located on the Left Side of the Engine, I need to know in order to Change the fuse of my windows
|
| Fuse blows when shifting to reverse | 27 Aug 2005 13:34 GMT | 5 |
My reverse light/blinker fuse blows when I shift my vehicle into reverse from park or neutral. I think it might be the Neutral Safty Switch. Can anyone verify this, or have other solutions.
|
| 1998 s-10 stalls and loses power | 27 Aug 2005 02:19 GMT | 1 |
Help! my truck over the last few months has been stalling and even shuts off as if the switch is turned off. I have taken it to the dealer and over 2 weeks they still could not figure it out. The gauges all go nuts like wipers on steroids or something. I am
|
| Time for a rebuilt transmission | 27 Aug 2005 02:07 GMT | 1 |
Its been a while since i put a post on here for my 93 Jimmy. Which is good because its been running great. The only problem i have not yet fixed is my transmission. I bought to a transmission place today and i'm getting my tranny rebuilt for $1450. Is that a reasonable price?
|
| 1996 Blazer third brake light | 27 Aug 2005 00:29 GMT | 1 |
My third (up high) brake light isn't working on my 1996 Blazer. Is this just a bulb to change out, or soemthing more. It looks like a bunch of little LEDs inside.
|
| 305 stroker? | 26 Aug 2005 23:22 GMT | 16 |
I recently was given-- yes, outright given... free as in beer-- a 1989 305 V8. I know the first thing everyone is going to say-- "get rid of it, get a 350" Well unless one of you want to trade a perfectly good 350 for a
|
| '06 Tahoe | 26 Aug 2005 22:49 GMT | 1 |
Any changes to look forward to in the '06 Tahoe? Body style, engine, interior, etc? Mark
|
| On Star question | 26 Aug 2005 21:42 GMT | 5 |
on star is going to a digital only in 2008 for there cell ph. service. how can i tell if i have digital or analog in my 2004 gmc sierra 4x4 or is this something the dealer or onstar would have to tell me. thanks
|
| programming pcm | 26 Aug 2005 21:29 GMT | 4 |
I'm looking at the Diablosport predator programmer. I notice it locks to one vehicle. I have 2 2000 chevy trucks. Is there a workaround or a method where this module can be used on both without reverting one to the stock programming? It seems nuts that I have to pay $400 per ...
|
| Rattle under car | 26 Aug 2005 09:55 GMT | 2 |
I have a manual '98 chevy S-10 and lately ive been hearing a rattle sound when i rev. Its only when im in nutral and i checked the exhust and theres nothing loose. What else could it be? Mike
|
| ignition switch | 26 Aug 2005 07:25 GMT | 2 |
I need to replace the ignition switch on my 2003 Trailblazer. How do I remove the airbag? I see there are two holes on the sides of the steering wheel to remove the clips on the air bag but I'm not too sure about rutting around in there. Any help?
|
| Brake Problem-98 GMC Suburban | 26 Aug 2005 04:35 GMT | 1 |
While driving home this evening, brake pedal went to the floor. Sounded like there was an air leak coming from the rod going into the firewall to the master cylinder. Seemed like it was affecting my engine idle, rpm needle kept dropping when applying pressure. My neighbor took the
|