Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / October 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Delco Maintianance free batttery 09 Oct 2005 02:25 GMT4
2003 Chevy s-10 pickup...Positive terminal leaking, it made a mess,the
truck is like new!  Any body know what causes this? This is the original
battery, and was
never touched! I inspected it 2 weekes ago before our vacation and it was
WTB09 Oct 2005 02:19 GMT4
I need a rear driveshaft form a 3/4-1T Chevy or GMC that came with a TH700.
It will be in the 55-56inch range(measured from the center if the front
u-joint cup to the center of the rear u-joint cup).
Please email me with your location and what you want for the 'shaft...
hi09 Oct 2005 02:13 GMT1
---
MAF Anti-Spam ID: 20051008030222L0j9YnO4
I pissed into the tank of a Chevy Truck !09 Oct 2005 02:12 GMT4
But it still worked fine, was even faster than before.
What does that mean ? Do I piss gasoline or a Chevy Trucks piss-driven
cars ?
steering09 Oct 2005 01:47 GMT1
what causes massive play in steering columns and how can it be fixed with
replacing the whole column. 2 inches play up & down and 1 inch side to
side. 1989 chevy pick up 1500 series.
Rear Rotors for a 2003 GMC 2500HD 4x408 Oct 2005 22:43 GMT7
OK, I have a 2003 2500HD 4x4 regular cab pickup and I'm thinking about
getting new rotors all the way around before winter. I have the 6.0L
gas engine if that helps.
The thing that's got me stumped is that the parts places ask me if I
Check out this Chevy truck08 Oct 2005 15:42 GMT3
I found this chevy truck on AutoExtra.com.  Sounds good for an older model
but just wanted to get an opinion.
Take a look and let me know what you think.
 http://autoextra.com/vehicledetail/adid-19323071/do-basic/?CMP=OTC-Fms&a=31
1998 s10 blazer08 Oct 2005 13:15 GMT2
i just bought a 98 s10 blazer i did not find out about the anti freeze
problem till now and it looks dirty could somebody tell me the proper
coolant and what to do about it thank you
noise in the front--91 s10 blazer 4wd08 Oct 2005 01:44 GMT5
91 chev s10 blazer 4wd-----have really annoying fred flintstone wheel or old
logging truck sort of noise in front.  It is like one would have from real
big knobby tires, xept i do not have them on vehicle at this time.  It
sounded like a gear noise like a bad pinion bearing or ...
Rec'd aftermarket ignition for '90 G10 van?07 Oct 2005 20:25 GMT12
   Please excuse the lack of info I may have on this van, it is my
father's. He does a lot of hauling with this van(a 31' travel
trailer!), and I would like to buy him an aftermarket ignition system.
This van is his pride and joy, it has a rebuilt '305, auto shift kit,
INFOS REGARDING TRUCKS.... etc07 Oct 2005 18:01 GMT1
hello to all!... i hope all u guys were all doin fine!... im a college
student taking up engineerinG!.... i hope i can get along with the
members sometime and share knowledge, ideas, tips and stuffs like
that!... well, i just post to make myself known here as a new
defrost07 Oct 2005 15:22 GMT2
1991 Silverado ext cab.  I have no air coming out of defrost vents.  I hear
a whistling sound but no air.  I have air flow on vent and floorboard
settings.   Any suggestions greatly appreciated.
Chevy/Ford truck question07 Oct 2005 06:20 GMT11
Which Chevrolet truck is equivalent to the Ford 150?    TIA
how to replace high beam bulbs07 Oct 2005 06:04 GMT2
I got a 93 silverado stepside and I can't figure out how to get the high beam bulb out to replace
it.  There is a space under the hood to replace the headlight and that was done easily enough but
when it comes to replacing the high beam one, there is a piece of sheet metal overing ...
Paint Detailing07 Oct 2005 05:27 GMT1
I have a 2000 Black Z71 which has been well taken care of.  Looks
great when it's clean  but minor scratches show up as white.  Are
there any products or methods to fix or hide these marks other than
re-painting?
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 September, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.