I have a 97 K1500 that seems to have an electrical problem or an ignition
problem.  Also, maybe related to first issue.when I press the brakes, the
brake lights come on, but go off as I push the pedal more.
Back to the first issue, I sometimes loose the tach, speedo, and gear ...

I just picked up a 1998 K2500 and the brake pedal is soft and able to go all
the way to floor. I have inspected all the brakes and they have plenty of
life left, I also bleed the lines at each wheel. Is there anything else to
check before replacing the master cylinder?

1993 Chevy s10 4X4, I'm having trouble with transmission shifting when auto
warms up it won't shift but when cold shifts out ok.  If I change
transmission filter will this help and how difficult is this? Where
located?

my husband was drinving home from work he cold not get over 35 mph when all
of the sudden the blazer shut off completely the rpm's right before was
around 5,000 at 35 mph,hooked it up to computer coded a map sensor and
throttle position sensor replaced them still will not start.when ...

I have a 2001 Chevy Tahoe with the tow/haul mode button on the shifter.
This function has stopped working and I have found that the wire (2
conductor, too small to fix and still be flexable) is broken. Has
anyone ever fixed one of these? A new shifter is $170 at the dealer and

When I bought my 2000 Yukon XL in 2000 I bought a GM service manual to help
with maintenance since I keep my vehicles a decade plus and like to do some
of my own repairs.
Well, the passenger side rear power window failed (actually it never worked,

Been lurking for a while here and now I need some help.  I bought a used 95
chevy k2500 and the original owner told me he changed the computer chip in
the truck to a towing version.  My gas mileage is horrendous and it just
doesnt seem to have the power it should.  What I would ...

I have a 2000 S10 2.2 automatic that will not start. When you turn key,
it does nothing. Dash turns on, lights, etc. I can hear starter fuse
click, but appears to be no power to the starter.
I checked the fuses and they are ok. There is no engine code to scan.

I'm looking for a drivers seat for my 1985 S10 Blazer 4x4  -  my material is
good but my frame is broke - please advise if you know of a good source

Anybody in the Saskatoon Saskatchewan area have a good running 5.7 Chevy
Diesel for sale?

2002 Trailblazer purchased new, 73,000 trouble free miles.  Suddenly unable
to put fuel into tank.  It spits fuel back like it was over-full.  Now has
little over half full tank.
My dealer says the check valve basket at the base of the filler tube has

Just bought the truck, love it.  Hate the way that beast sounds.  I'm
paying for the gas, I want to hear the engine.
My mechanic said not to f.ck with the muffler cause the computers would
go crazy.  Has anyone here put a high flow muffler on a 6L vortec

[ Article reposted from rec.motorcycles,ba.motorcycles ]
[ Author was Caerus ]
[ Posted on Tue, 11 Oct 2005 12:13:28 +0000 (UTC) ]
Excert from AP Wire, Monday October 10, 2005

I just changed a top ball joint and the wheels are still leaning out at the
top just like before I changed it. Can someone please tell me how I can
draw that wheel back in an make it inline. I have helpers. Thankyou!

I was headed home tonight and the three aluminum tabs that bolt my
altenator on all failed.  Has anyone else had this problem before.  The
current altenator has been on for about 3 years so I know that didn't
cause the failure.  The belt didn't break either.  I am guessing I will