| Thread | Last Post | Replies |
|
| 95 blazer making clicking noises | 20 Nov 2005 16:06 GMT | 1 |
hi I have a 1995 Chevy blazer and i was wondering if anyone could suggest what these noises are. When i first start the truck i cant here it but when it stars getting towards operating temperature i can here a clicking or tapping noise on the driver side of the engine. I was ...
|
| wiper blades | 20 Nov 2005 15:43 GMT | 1 |
How good are these silicone rubber blades? -- boots
|
| 95 chev blazer 4.3L Vortec engine troublshooting | 20 Nov 2005 13:30 GMT | 8 |
my service engine soon light either flashes or stays on.It is running very shitty and sucking up the gas.There is no power going to the data link so I am not able to retrieve the trouble codes. I have replaced the pcv valve, cap and rotor, plugs and wires, oxygen sensor, fuel filter ...
|
| Headlight bulb replacement on 1996 Chevy blazer | 20 Nov 2005 09:15 GMT | 2 |
Hi. I am trying to replace the headlight bulbs on my Blazer. I can not figure out how to get at the bulbs. Do I remove the plastic clear cover on the outside or is there a way to release the headlight housing without removing half the parts under the hood? Thanks.
|
| 98 hd 3500 454 no start but fires | 20 Nov 2005 08:35 GMT | 4 |
i have a rollback that the wire harness burnt up last week , i rewired the burnt area and changed the crank and cam senors and she fired right up, ran the best ever one cold morning she started great made it to the end of the driveway heard a pop and she quick, go mad and tried ...
|
| 2001 Chevy Tahoe (problem) | 20 Nov 2005 08:31 GMT | 3 |
I have a 01 Tahoe Lt that is experiencing a problem with a vibration at road speed. when the road surface become choppy or rutted is vibrates severely and almost beats you to death. steering wheel does a dance in your hand and
|
| 2000 Blazer vacuum line schematic..?? | 20 Nov 2005 03:18 GMT | 7 |
Posted a few days back regarding help with no heat to the floor of my 2000 Blazer. So far no responses, so I was wondering if anyone has a schematic of the vacuum hose layout so I could begin tracing these lines to see if a hose is the problem.
|
| 2001 xtreme blazer please help!? | 20 Nov 2005 02:07 GMT | 3 |
I have a 2001 xtreme blazer and have started having suspension problems recently. The truck is lowered more than the factory lowering from GM for the xtremes and there is a bad knocking in the right front and i got all of the suspension replaced A-arms, shocks the works and it
|
| 1998 Tahoe 6.5TD Heater Hose Quick-Connect Leak | 19 Nov 2005 20:56 GMT | 14 |
Just finished replacing/repairing the leaking quick-connect (from thermostat bell housing to heater hose/tube). As expected, the bast*rd snapped off quite easily leaving about 1/2" sticking out of the bell housing. Tried a vise grip on what remained and snapped that off, too, ...
|
| Any real difference between 'GMC' and 'CHEV' name cargo vans ?? | 19 Nov 2005 17:30 GMT | 22 |
Are there any differences mechanically or body wise between the two ? Thanks.
|
| Power Steering Problem with 87 C30 | 19 Nov 2005 12:17 GMT | 26 |
About one year ago I bought an 87 C30 with about 170,000 miles. I have used it little, put on about 1,000 miles. About 100 miles ago, the steering would tend to lock up occasionally. Now, it seems to be permanently locked. When the steering wheel is
|
| FS Center inserts | 19 Nov 2005 01:38 GMT | 1 |
I have a brand new set of 4 Center inserts from my 2002 Chevrolet Silverado 4x4 Please email if anyone is interested. outlander1969@hotmail.com
|
| wiper blades | 19 Nov 2005 01:37 GMT | 2 |
has anyone tried these silicone wiper blades? are they any good? -- boots
|
| Truck shake. | 19 Nov 2005 01:24 GMT | 1 |
My truck, Blazer silverado runs fine but wehn i change the gear from P to R the entire truck shakes and make a loud noise! Wehre should i start looking the problem? Dou you think that my automatic transfer is broken? Any help?
|
| 2 Questions | 19 Nov 2005 00:30 GMT | 2 |
I have a 1994 Silverado with the V-6 & 5 spd. and 181,000 miles on it. I have noticed lately that the "Check Gauges" light will come on. I find that my temp gauge is almost maxed out. It will stay there for 10 seconds or so, then will go back down. If I actually see it rising, it ...
|