I own a 1999 silverado,2wd,recently the trans started slipping after
changing to second,so i changed the filter and that stoped the
slipping.
But,now the trans makes a metal rubbing sound(kinda like worn out brake

Any one know how to rewire the cig lighter or the aux so they turn off
when the key is truned off?

Folks - just bout a '98 S10, 108,000 miles - get it home was cleaning it up
and noticed that the driver side, front and rear, sits about 1.5 inches
lower than the passenger side!!! Original owner (1 owner vehicle)  I bought
it from was not that big of a guy - never been wrecked. ...

The contact tab on one side of the rear hatch window on my 2000 Yukon XL
came off last winter at 28,000 miles. (More GMC quality construction at
work.) The tab took a little of the conducting substrate with it from the
glass.

My voltage jumps around from 13.0 to 14.0. It usually starts in the
normal range,~13.8, but shortly drops to 13.0-13.4 and pretty much stays
there with the occasional excursion upward. Is it the
alternator/regulator or could a faulty battery cause the regulator to

Ok here is another pro / con comment post.
I have a 92K1500 5.7
I've removed the factory air cleaner and have installed an open
element eldebrock air filter housing with about a 3 inch tall wix air

hopefully one of you can help. i own a 91 s-10, v6, 5spd. yesterday the
ignition switch went out. it clicks all the way to the run position but not
to the start position like something is blocking it. thats as far as it will
go. im a carpenter and not the most informed about auto ...

I've heard for some time; Nissan called the Japanese Chevrolet, and
since I've had a hard time finding a cheap gas miser (truck), I bought
one. Seriously, I didn't buy for that reason, just like 'em. Am also
real curious about the transmission; it's a 5 speed that has a real nice

About one year ago I bought an 87 C30.
As a preliminary question, what is the copper-colored
object in the center of this picture?  Seems like it
must be a filter.  Is it?  Does it unscrew?  Is it at

I decided to change the transmission fluid and filter on my 1998 K1500.
After draining the fluid, removing the filter, and knocking the brass(metal)
seal where the filter inserts into the transmission, I tried to replace the
brass seal and I cant get it to fit.

My '98 K1500 makes a squeaking sound when it is running and I believe it is
the belt or possibly a bearing in one of the items the belt goes to.  Any
ideas on what it may be or if it is the belt itself, is there some sort of
belt dressing I can put on it to quiet it down?  The ...

i had the left side of the vortec 350 intake manifold gasket leak and i got
into fixing it with no manual and just some instructions over the phone.
bad news when i went to move the ac compressor bracket i needed to take
off the power steering pully to get at the bolt. i used a ...

This is a weird one-The truck makes noise until warmed up.I'm sure it's
related to the belt-It looks fine.Any ideas?Just change the belt to
start with?Idler tensioner?Thanks for any ideas.

   I have a 2005 Crew Cab GMC Sierra Z-71.  I love the truck, but have a
major issue with something the local service department and GM says is
normal.  When I leave the truck parked for a long period of time (so far 20
days and 21 days) the battery dies.  I travel with the Air ...

2004 silverado 4x4 extended cab.  Or the accessory jack next to it,
both are on all the time want one of them to trun off when key is off.