Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / December 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
5.7 L bad valves/lifters?27 Dec 2005 08:25 GMT7
my 1997 Chevy Pickup with 350 cid and 110,000 miles taps/ knocks when cold(
goes away after a minute or two) and when under hard acceleration.  A dose
of valvemedic helped the situation for a week or so and then returned.
The engine does not burn a drop of oil and still runs like ...
Won`t Start27 Dec 2005 07:54 GMT7
 About 6 weeks ago I received an '89 regular cab pick-up 2x4 5.7.
My Dad gave it to me. The truck only has 70,000 mies,but the body is
shot.
2 day`s ago it wouldn`t start. Cranks over fast,but doesn`t even try to
lookin for chev actuator26 Dec 2005 08:01 GMT6
anyone have a front differential actuator for a 88-90? chevy truck pls
e-mail me with price..or is there anyway i can remove the  rubber  and try
cleaning and lubricating the  lil piston inside the actuator to make it
.spring out???
inline heater on a 86 K526 Dec 2005 00:26 GMT13
I have a 1986 K-5 Blazer 4X4 5.7L  and I'm looking to install a heater I
bought several years ago for a different truck. Its the type of heater the
installs in line on one of the heater hoses. Since the box and directions
were lost long ago does any one know which hose is ...
sway bar bushings repair25 Dec 2005 04:47 GMT3
just wondering if any one would care to take a guess at a repair job
for a 1986 chevy blazer sway bar brackets
                                           thank you
96 GMC signal problem24 Dec 2005 19:44 GMT4
I have a 96 GMC K1500 that has a issue with the left side rear turn signal
and brake light. The left front will flash very fast, but it does flash. The
left rear will not flash and the brake light will not work. The tail light
does work on that side. I've even had the back-up light ...
scan tool24 Dec 2005 14:30 GMT4
scan tool shows reading po420,need to know what is bank 1 and bank 2,thanks
SEL Seems to be posessed!24 Dec 2005 08:24 GMT6
2002, Blazer, 4.3, auto, Tahoe trim.
Strange SEL light, It ONLY comes on when the vehicle is full of fuel,
while ascending ONE local hill near Little Falls. No other hills seem to
trip it and nothing else has ever turned it on.
92 s-10 blazer 4.3 vortec with NO POWER HELP!!!!24 Dec 2005 00:15 GMT6
I have a 1992 Chevy S-10 Blazer 4wd auto, with a 4.3l Vortec V6. It has a
new fuel pump, filter, spark plugs, plug wires, rotor, cap and computer.
It has also had the cat converter cut off. The timing has been checked and
is dead on. The problem is, it has no power at highway speeds ...
OIL LEAK 96 S10 4.324 Dec 2005 00:13 GMT1
I HAVE OIL LEAK UNDER THE FRONT OF MOTOR. WHERE COULD IT BE COMING FROM
LOOKS LIKE AROUND CRANK SHAFT.
2003 Silverado Brakes23 Dec 2005 23:17 GMT11
Today I discovered the one rotor for the rear brake of by 2003 Silverado
1500 has almost disintigrated. The inside of the rotor was almost
nonexistant. I have 93000kms on the truck (4.8 V6) Has anyone else
experienced their rotors going this fast? Most of the mileage is highway
steering me crazy23 Dec 2005 19:57 GMT2
Got a loose steering wheel problem. followed the book , steering wheel off
,block plate off , lock ring off, but the book won't get me past the
wires. how to pop the shell and do i need to drop the column?  HELP!
connecting rod identification23 Dec 2005 19:48 GMT1
any websites or literature available to correctly id connecting rods?
96 chevy truck headliner question23 Dec 2005 18:49 GMT1
How Does the headliner come out of a 96 chevy full size extended cab
truck? Can I replace the material myself like I did in my 89 f-150? On
this truck I cant tell what is holding the board in. (Especially the
Tired old 96' Suburban23 Dec 2005 16:41 GMT4
I have a 96' suburban ( which is my second sub) and I just put a
rebuilt transmission in it.  It has 165K miles on it.  The question is,
I pull a trailer and have two little kids, I don't want to break down,
so is it worth keeping or should I get a new one. More specifically,
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 November, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.