I have been having this problem since the beginning of this week. It's
been getting cold here at night 18-28 degrees F. So monday, I go out
and start my truck and it revs up like normal but when it idles back
down it bogs like it is going to die. The truck is kinda jumping like

I have trouble with my S10 Blazer-98 the 4wd dont work. Its not
possible to shift betwen 2hi 4hi and 4lo. I tryed to change the motor
and encoder on the transfercase but still the same problem. I only get
light on 2Hi pushbutton and somethimes on 4Lo.  

Hi... I'm about to start playing around with some analog-to-digital
stuff--mainly logging data through an RS-232 port on a laptop.
I'm curious as to whether anyone knows the specs on the standard water
temperature sensors that reside in our small-block Chevys.  Mainly, I'm

Has anyone ever had a remote starter installed on a 2001 Tahoe (or similar
vehicle)?  Did you do it yourself or go somewhere like Best Buy or Circuit
City?  Can you recommend a particular brand, or advise on one to pass on?
Any help is appreciated.

Hi there, I got a 2000 GMC Safari, my work vehicle, what I want to know is
there a way to make all 4 head lights come on when using high beams, I have
seen some other trucks and vans with all 4 on, but not sure how, if you
click it once for high beams then click and hold, all 4 are ...

new chevy trailblazer has black running boards, step/bumper in the back
and other black bumper areas made of the same material.... its dried
out and has a white, aged look to it... I tried armor all, but it just
seemed to suck it up and still look dry... is there some professional

I have a 1999 s10 zr2.Wnen driving around i shift in & out of 4wd a lot.I
put it in 4wd to take off at ice & snow covered intersections then take it
out when i`m on bare roads.Should i just leave it in 4wd or does it hurt it
to shift in & out?I shift for better mpg on dry roads.. ...

I haven't been unable as of yet to find a wiring diagram for the tank
selector
switch and actuator in my '76 3/4T chassis. Anyone have a link where I could
get one or maybe a hard copy they could scan and email to me or copy and

I have been unable as of yet to find a wiring diagram for the tank selector
switch and actuator in my '76 3/4T chassis. Anyone have a link where I could
get one or maybe a hard copy they could scan and email to me or copy and
snail-mail to me?

Does anyone know how to check the fluid level?
The truck has been parked for over a year and I just wanted to make
sure it was full.
Thanks,

i bought the truck a couple of weeks ago. the tranny was wworking fine
when i got it but after driving it about 60 miles i lost 3&4 gears. i
replaced the tranny with another 700r4 and still doing the same thing. i
was driving the truck today and engine just died and when i got it

can some one help me i need  to  check fluid level in the transfer case but
dont know where  the fill hole is located

The better half used the hazards the other night. with no problem,
after turning them off she noticed no turn signals, now the hazards
don’t work either. odd side effect, pressing the hazard button down
hard (all the while hoping the switch was just stuck) resulted in the

Just bought a device on internet that will allow me to connect iPod to
factory stereo CD changer input. I need to get to the back of the
stereo to plug in the cable.
I have a 99 Silverado, that's the new body type, first year of

I have an 88 Chevy one ton dually with a 454.  A few days ago I noticed
I was leaking antifreeze.  I have not had enough time to fully look at
it but I do see that the antifreeze is running down the bottom of the
bottom radiator hose.  Do you think I have a leaking water pump or ...