| Thread | Last Post | Replies |
|
| s-10 blazer '02 periodic shudder under load | 11 Dec 2005 04:19 GMT | 1 |
I just changed out intake gaskets on my blazer (4.3L) and now it runs great for the most part. If I am on a grade and the engine is under load though, say at 55MPH and the load it takes to maintain speed going up a slight hill, there's a periodic shudder, like about every 15
|
| '95 Tahoe Radio/cd display | 11 Dec 2005 04:13 GMT | 5 |
Has anyone in the group ever had a '95 vintage (Tahoe) GM stereo (AM/FM, Cassette, separate in-dash CD player) where the digital display went totally dead, but the radio still works? Also noticed that the CD player appears to not work. Its weird, because the 2 radio related ...
|
| 2002 Silverado blower | 11 Dec 2005 01:29 GMT | 16 |
My 2002 Silverado 2500's a/c blower would only work on "5"; nothing happened on any of the lower speeds. Now, it's gone out completely...nothing happens on any speed. 1. Is this likely to be the blower motor and a resistor, or just the
|
| 99 Suburban ABS problem | 11 Dec 2005 01:13 GMT | 2 |
Was out playing in the snow recently and engaged the brakes to see if ABS worked and when I hit the brakes it dimmed the lights and killed the engine and would not restart right away. But it did restart in a few minutes and everything now is normal. Have not tried this experiment ...
|
| Check Engine Light | 10 Dec 2005 20:17 GMT | 1 |
I have a 99 Silverado with the 5.3L. I've been running about a month with the message center light that says "change engine oil." The other day, my check engine light came on so I was thinking I'd better get to autozone to have the code read. I wasn't in much of a hurry cause I ...
|
| 89 chevy vehical speed sensor | 10 Dec 2005 19:44 GMT | 1 |
Does the VSS affect the 4x4 ability to engage i just had the acuator mortor replaced and the wireing harness replaced but when the VSS went out so did the 4x4 just wondering thanks
|
| mercury villager | 10 Dec 2005 03:42 GMT | 3 |
|
| trying to find year of 305 motor | 10 Dec 2005 00:49 GMT | 2 |
I have the numbers from the head of my 305 motor. What do I need to do in order to find out the year of the motor by using the numbers from the head?
|
| 95 CHEVY 6.5 TURBO DIESEL PROBLEMS | 09 Dec 2005 22:01 GMT | 1 |
THE 6.5 THAT HAD A CRACKED PISTON.WELL WE INSTALLED A 94 6.5 IN THE TRUCK BUT WE CAN'T GET IT TO RUN RIGHT.WE INSTALLED NEW MARINE INJECTORS BEFORE WE PUT IT IN.THE TRUCK WILL NOT IDLE RIGHT & HAS A MISS IN IT.WE PUT THE PUMP FROM THE 95 MOTOR BUT IT DID NOT HELP.THANKS KINGPIN
|
| Front wheel bearing replacement on 10-bolt...One man job? | 09 Dec 2005 19:36 GMT | 39 |
My wheel bearings need to be replaced on the front passenger side of my K5. The axle is a stock 10-bolt. On a 1-10 scale of difficulty, how would you rate this, and is there a decent online manual/instructions to assist me? I Googled, but didn't
|
| Blazer to pickup conversion, where to find... | 09 Dec 2005 19:06 GMT | 3 |
I'm looking for the piece pictured on this eBay auction: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4595655409 This converts a K5 to a short pickup. Does anyone know where I can find such a thing? It just bolts in according to the owner. He
|
| 95Chevy Astro Van Brakes | 09 Dec 2005 15:58 GMT | 1 |
My 1995 Chevy Astro Van is: 4.3L engine Automatic Transmission 52,000 miles
|
| Synthetic Oil | 09 Dec 2005 01:45 GMT | 12 |
I changed to Synthetic about 2000 miles ago,and I know you can go a long way. My question is,how long should I go before the first oil and filter change?
|
| fuel pump ? | 08 Dec 2005 23:06 GMT | 1 |
I have a97 5.7 gmc pick up.I parked today and when Iattempted to start it it turned over fine but would not start.I can not hear the fuel pump running like I always do.The fuel pump relay is good and so is the fuse.What do I need to do to make sure it is not something ...
|
| 98 K1500 Suburban block heater replacement | 08 Dec 2005 13:42 GMT | 3 |
Can anyone tell me how hard is it to replace a block heater on a 98 4x4 suburban ? do i have to drain the coolant first etc ? from what i can tell from laying underneath, it is directly above the oil
|