I just purchased a 1998 K1500 (without the Z-71 package) that came
with steel wheels. Do the 5-spoke alloys that came with the Z-71
package fit? I know they are both 6-lug and I believe thay both have
5.5" bolt pattern but is the offset correct? Also, what size tires

 Next week my 91 suburban will be going to the mechanic to change the
intake manifold gasket.  Is there anything else they should be when they
have the engine open???  I was going to have them check the stretch of the
timing chain, wear on the distributor, relash the valves, ...

I have a 97 Suburban and the door hinges are driving me crazy, every bump I
hit it squeeks. Looking at them, from the top the hole that the pin rides in
is kind of egg shaped. On the old 1/2 tons it was a simple job of unscrewing
the worn out ones and installing new ones. These ...

Sorry if this is a dead horse I'm beating but even after reading the
threads on wiper boards I just wanted to get more feedback on my problem.
Truck: 1997 Chevy K1500 Suburban ( 125,000 Miles ) - Bought used  6/03
at 65K

Ok, Simple enough question.. How in the hell do you represserize your Fuel injection system from a 6.2 liter after losing its presser
--
Squee
-----------------------------------------------------------------------

WELL I FIXED THE DELCO RADIO (LOCC) PROBLEM NOW I HAVE RECEPTION / BUT CD
STILL IN (ERR)  HOW DO I GET MY CDS TO PLAY RAN A CD CLEANER THRU IN / BUT NO
CHANGE.BUT GLAD TO GET RADIO FIXED BUT LIKE MY CDS / NEED A GOOD ANSWER &
HELP ????           REPLY !!!!

'98 Z71 w/5.7, 78k miles, looks like the intake gaskets are starting to
leak... (from reading some of the other forums, it seems GM's got a problem
with this intake manifold) Anyone had any luck getting the dealership
correct the problem?

Just a heads up/rant if anyone else was planning on playing with there T5.
I've got an '86 S10 4*4 (5spd of course).
Tranny has been growling for some time, so I finally nailed down some time
to work on it.  Picked up a low mileage used tranny from a 2whl drive, with

Yep...I did it...  It's one of those things you either read about or
somebody tells you about.  Either way, you realize how incredibly
bone-headed it is and think to yourself that you could NEVER be such a
moron...

WHILE DRIVING ABOUT 70MPH I THOUGHT I GOT A FLAT TIRE. AFTER PULLING
OVER AND  REALISEING IT WASNT, I CONTINUED ON MY WAY.AFTER REACHING
ABOUT 50MPH IT FELT LIKE I WAS GETTING A FLAT AGAIN. WHEN I PULLED OFF
THE ROAD IT FELT LIKE THE TIRE WAS GOING TO FALL OFF.SOME ONE PLEASE

I've got the pleasent job of replacing the front bearing/hub on my 99 jimmy,
I've got the caliper loose, but cant get it off, all it will do it wiggle
around.  How do I get that loose? Also do I have to take the entire spindle
assembly off?

Hi I pulled my front wheel opff today on my 2002 Trailblazer I notice some
grease around the CV boot area but not much and I never found any cracks in
the boot unless I never saw it is thjat grease normal form driving or do you
think the CV boot really crack thanks

i see the 98 suburban has a 40 gallon tank.
its rated for 18mpg highway which gives me about 720 miles per tank
highway.
i will be using it to commute to work and hope to fill up only once a

Just picked up a engine. Has a new cam and lifters. It is a roller cam. Part
numbers are 097 01R and 586FM61. Looks fairly agressive with a good lift.
Like I said, it's new obvious 0 miles on cam and lifters. Hate to throw it
out but I have to know what it is so I can match the ...

I was wondering if anyone out there has had any bad/good experiences with
the company below:
S&J Auto Parts/Find Part
Address: