| Thread | Last Post | Replies |
|
| 2000 Suburban Keyless entry transmitter programming help | 26 Jan 2006 14:20 GMT | 2 |
Just got a 200 Suburban. It only came with 1 key and transmitter. So, off to the dealer, got a new key & transmitter. Silly me. My Ford Explorer tells how to match the transmitters to the car but Chevy doesn't.
|
| 1999 Chevy Venture + possible dex-cool problems | 26 Jan 2006 13:23 GMT | 4 |
I'm hoping I haven't fallen into the category of those with dex-cool coolant leaking into engine. The past week my low coolant light has been coming on. I have added til I cant add no more. The next day most of the fluid has vanished, but no sign of leaks. Van has been driving
|
| Tips for separating heads from the block | 26 Jan 2006 06:24 GMT | 12 |
OK, I've got everything torn down with the engine in the car. All I have left to do is yank the head off, but it's putting up a fight. I'm afraid to crazy with the prying so I don't ruin the mating surfaces, but has anyone got any tips on a good pry spot or some other trick for
|
| tires and wheels | 26 Jan 2006 05:55 GMT | 4 |
Does anyone know what is the biggest size tire and wheel combo for a stock 2004 1500 std cab 4x4 not lifted.
|
| New Alloy on Older Truck | 26 Jan 2006 05:50 GMT | 1 |
Just want to verify something. I have a 1998 K2500, 8-lug with steel wheels. I'd like to put some alloy wheels on it, and do like the looks of the wheels that are on the new-production K2500's. Will these wheels fit the older style truck?
|
| other blazer question | 26 Jan 2006 02:37 GMT | 3 |
My blazer has 130K now. When will I need to change the timing belt/ chain?
|
| 89 2500 Trans. question | 26 Jan 2006 02:19 GMT | 1 |
I have an 89 3/4 ton 4.3L regular cab long bed. It has a 4 speed manual transmission that is broken. What are the requirements for switching to an automatic. Can I put in a non-computer turbo 350? This is a ranch truck and will not need to pass inspection.
|
| Little SOBs broke into my K5... | 26 Jan 2006 00:20 GMT | 26 |
<rant> Sorry... I just have to bitch. My K5 is still sitting there...not running. Weather, lack of daylight and other issues have prevented me from getting out there and working
|
| Chevy G20 Van running rich, but getting code 44 (lean exhaust) | 25 Jan 2006 22:12 GMT | 2 |
My 1990 Chevy G20 is running very rich (to the point of suffocation within 1 mile radius!!) The engine is a 5.7L V8 TBI and I keep getting error code 44 (which according to my Haynes manual means "lean exhaust" measured by the Oxygen
|
| GMC Yukon XL Autoride problem | 25 Jan 2006 21:26 GMT | 1 |
Looks like the rear air shocks are junk on our 2000 Yukon XL with Autoride...... any idea where I can get a set of rear air shocks (part # 22187160) for less than what the dealer wants for them??? Thanks in advance.
|
| chevy blazer window motor replacement | 25 Jan 2006 19:44 GMT | 1 |
I need to replace the window motor on both doors of my 91 blazer. Anyone have any idea how to get to it without cutting up my arm. I can't even see the unit. I can feel everything in the assembly, but I can't see the bolts to remove them. Is there an easier way than doing it all ...
|
| Rhino Spray Bed | 25 Jan 2006 16:50 GMT | 26 |
I am interested in experience with the Rhino spray in bed liner. Has it chipped? Peeled? or discolored? I am considering have my bed sprayed.
|
| 1991 K1500 runs down battery | 25 Jan 2006 05:00 GMT | 2 |
Last weekend I found the battery completely dead on my 1991 K1500. Charging and testing the one-year-old battery showed that it was okay. A possible clue is that the display on the heater/AC controls stays on after the ignition is shut off and the key removed. (This started over
|
| 88 chevy runs bad | 25 Jan 2006 02:31 GMT | 5 |
i have an 88 chevy k2500 barley runs backfires through throllte body and when i disconnect timming connector it runs much better i replaced map sensor/ egr valve/ecm/esp module and still no luck i appreciate any help i can get thanks
|
| 97ck1500defrosterwhistler | 25 Jan 2006 02:00 GMT | 1 |
Get no air out of drivers side ,whistle noise,but passenger side works,so does floor.any suggestions Thanks Gar -- garwood
|