Man I have found this site that has the cheapest ink for any printer.
You can compare prices and then review the companies on service and
quality. <http://www.imagraphix.com> Let me know what you think

AFAIK, the rear dually axle on non-HD 3500 models has always come in two
widths, narrow and wide. The wide version is the kind that when used on
regular pickup trucks requires large fenders attached to the side of the
bed. The narrow version is used on C&C trucks and will not ...

Be sure to include the hears below to the abuse department:
Path:
news-xxxfer.readnews.com!198.186.190.250.!transit3.readnews.com!news-out.readnews.com!postnews.google.com!z34g2000cwc.googlegroups.com!not-for-mail
From: "xfxnow" <xfxnow@hotmail.com>

 The  rear  end  on  my  96 Yukon 4 door  sags  under  weight  even
alittle  weight,  Should  i  go  with  coil over  shocks  (load
levelers)  or  air  shocks,  i  do  not  want  a  bouncy  or  hard  ride
just  need  some  help when  loaded  up.  Trailer  etc...

my wife and I finally broke down and bought a used suburban and she was
upset to find that the heated seats on the drivers side were not working(
ok, so was I) the passenger side works great. anybody have any idea what I
could check before I have to spend a fortune at the dealer.

I have a 94 Sonoma 4.3L TBI 5 speed 4X4, that is spewing black smoke out of
the exhaust.  Sometimes it will stall and I can only get it restarted by
pressing the gas pedal to the floor.  There are no codes or I should say
there is no check eng light.  I have been reading about ...

Could anyone tell me if the metal backing plate shields on a 4x4 pickup
would be the same?LMC Truck mostly sells pickup parts,the lady told
me,and I would like to be sure before I put in my order.GM doesn't sell
this part any more.Thanks for any help or suggestions where I can get

I know this is a 4x4 group and I have two of them.
I also own a 55 Chevy. I'm looking for any info on replacing wing vent
frames and weatherstip. They are rivited together any help with them would
be priceless.

I have an 85 Full size chevy truck, I need to replace the drivers window,
how much of a job is this? and does it have rivits or bolts holding the
glass in? I have power windows if it matters

Me again,
Thanks for the very valuable information in answer to my previous post.  OK,
so I won't go for one of the many 305s available nearby, so I am still
searching for a reasonably priced 350 for my 86 half ton.  I've seen some

Where can I get a dual exhaust system, manifolds back, not Chinese junk.
Auto parts stores have none.

I'm on my third Holley trying to fix a problem of getting way to much
gas into the engine. I've had three mechanics work on the engine but
within weeks the problem returns. I got the engine with a 750 cfm on
it. The first mechanics advice was to replace the high rise manifold

Hello to all,
I am having a problem on my 98 GMC Sierra Z71 with the front brakes.  I am
getting severe warping at about 6,000 miles of driving, mainly city.  The
breaks seem to be warping to the point that when I apply the breaks the

     Hey Guys,
      My truck has 60000 kms.  It has the 4.8 ltr engine, auto tranny.
Why is my speedo jumping and sticking.  Ive heard about this problem
somwhere, but I dont know the fix.

I'm wearing out my starter. It takes 3 short cranking sessions to start
the 4.3 liter in my 2000 Astrovan, maybe 5 or 6 on cold mornings. For
most of its life it started on the first crank. Now it takes at least
two short cranks when hot and 3 or 4 when cold. I could crank until the