I have a GMC Sierra Classic 1500. It is currently an automatic and I am
wanting to convert it to a standard 4x4. I am unsure of the steps to do
it or how expensive it will be or if it is even worth doing. I know
there will be a lot of cutting and welding I just dont know how much.

I have a friend that is going to move to Arizona from Indiana. He has a 96
G-20 van. It has  5.7 engine and it has all the extra coolers for trans
and oil. The van has 9000lb G.V.W. so it is on the heavy duty side of the
scale. The trans it has is the 4L80E or option code MT1. We ...

Saw a post about the 99 Burb, thought it might help.
I have different wire colors.
Truck did not come with the tow hitch, nor female plug for the trailer.
Friend told me last night I do not need the trailer brake controller for the

My husband  recently replaced the water pump and some sort of hose
that's part aluminum and part rubber.  Now when he goes to start the
truck, it turns over and over and eventually starts.  Does anyone know
what could be causing this?

i have a 2001 chevy silverado and today while i was driving all of a
sudden the truck stopped and i had to pull over i could push on the gas
pedal but the truck wont move it revs up but it doesnt move it seems as
if you are in park in every gear also the transmission fluid smells ...

My 82 S10 A/C compressor finally died after 300K.
My question is this.  I can get a used one from a junk yard for $75.  They
guarantee it for 90 days.
I assume I would have to replace the dryer since it would most likely catch

I noticed the original poster mentioned heavy traffic situations and
slow going on the freeway.  I have noticed one thing happening with
almost all my vehicles that in stop and go traffic, wether it is on
the highway or in downtown traffic.  If you follow or sit closely

My 99 yukon 5.7 has been consuming about 1 1/2 quarts per 3000 miles.
Is this common?  I have inspected the engine for leaks and haven't
found any.  There is no noise coming from the engine and the truck
seems to run fine.  Also, there is no smoke (blue) coming from the

I have a 99 Chevy Silverado with power windows. The windows has stuck in up
position. When I activate the button to the down position I hear a clicking
sound in the door panel. 2 questions, should I assume it to be the switch
or the motor and how do I remove the door panel?

GM's business must be wonderful. I have not checked the stock price, but
it must be at an all time high.
The reason I believe this is that trying to get Chevrolet and GM Truck
dealers to call back and follow-up in darn near next to impossible.

The crankcase breather, ACDelco #CV870, on my '83 Surburban/6.2L diesel,
is starting to spit up small quanties of engine oil irregularly, and my
mechanic says its time for a new one. Before I accept this, I want to
educate myself a little:

Hi..I have a 03 Silverado Z71 with about 95000 km on it.  About a month
ago I had a nasty grinding noise coming from my transfer case
periodically.  I took it into my dealer and it turned out to be my
electric 4x4 switch malfunctioning.  I guess its a common thing, it was

I have a 1989 chevy silverado pickup.  Driving home from work one day, the
truck died.  In the process of troubleshooting, I noticed I had no spark to
the plugs.  I replaced the wires, plugs, distributor cap, and rotor cap and
still have no spark.  I am getting fuel since I can ...

5.3 Liter 2001 Silverado 80,000 miles.When I fill my tank the low fuel light
comes on and the gas gage goes to empty.
OK its probably the sensor in the tank correct?
Now the service engine light is coming on with the code reader at auto zone

Just curious.
Thanks