94 Z-71 ext. cab. does not have abs. a few month earlier light would
flicker on rough roads,over r.r. tracks, etc. Has gotten to the point
now flickers all the time , sometimes when i stop at a light, if it is
doing it bad enough it will cause the motor to cut out and sometimes

when I start the truck, there is a loud rattle sound coming from the air
conditioning pump.  Sounds like a small marble rattleing around inside.  Any
ideas on what the issue might be?  At first I thought it was just a squeaky
belt so I applied belt dressing, and now this rattle ...

I have a 2000 k2500 suburban, and my driver window stopped working out
of nowhere! We thought it was the switch because it just STOPPED
working it wasn't like the motor was going, and the window got slow or
anything. The rest of the windows worked not only from their individual

Anyone know of a web site that has either service or owner's manual's
available for download? PDF? A friend just bought a 2003 Yukon Denali
that didn't come with either and the dealer probably would want his
left nut for them. Thanks. Kevin.

i was trying to find out the ATF capacity for a 93 chevy blaer. i was
towing a heavy trailer and expelled quite alot of the stuff. i know
that can happen if it overheats. any advice b4 i take it in? is that
episode necessarily a death blow to the tranny? thanks for any help.

I am looking at buying a Chev 3500 2wd van with a Duramax diesel in it for
my business. I will be hauling about a 1500 lb load and towing a V nose
tandem axle cargo trailer with trailer and cargo weighing about 6000 lbs.
The other van I am considering is the Sprinter although ...

Howdy!
Found a link from this group doing a search about this problem:
http://groups.google.com/group/alt.trucks.chevy/browse_thread/thread/eb18b8c8d10
39672/e357430a4de943a%23e357430a4de943a
Can anyone tell me where the blower motor resistor module is on my '99

Vibration shows up in the 90 Blazer (fullsize) Crawl up under it with a
tire tool and check the "U" joints. No noticeable wear. Jack up rear
axle, "feel" the wheels as they spin and shake em back n forth looking
for bearing issues, drivers side "feels" a bit rough. Replace bearings

Let's say that I walk into a dealership today and we decide that I buy
a truck that they would order made according to options that I
selected. What are the customary things that would happen, how much to
put down, are trade-in papers signed the same day, how long it could

I'd like to get it legal for him. I can overhaul the carb, I'm good at that.
(and old, too)  Iwas looking for an O2 sensor (breif look) and didn't notice
one.  Is there one on this vehicle? I seem to remeber trucks having a lot of
exemptions back then.  Thanks, George

http://img.photobucket.com/albums/v393/RicoGTO1/Cayuga/1.jpg
Located in Stoney Creek, Ont. Canada...170,000 miles ..350 auto, pw/pdl
cruise, alarm, etc...Owned
for 12 years...drives very good, needs a little body work on rockers

My girlfriend drives an '06 Tahoe.  On the dash display, you can flip
through a few different things and eventually it'll show you the
average MPG.
My question is, how is this measured?  My 2000 Saab has the same thing,

Ok, not surprisingly when I got my 89 pickup last year the drivers side
door was loose.  It was sagging so in went some new pins w/ bushings,
sag gone.  Next went to replace the striker bolt since it was notched
pretty good.  When I did so the one I got and what everyone seems to

As you can see, I am a ponderous person, trying to think of everything
before making a buying decision.
I am currently thinking about using a diesel vs a gas engine on 2500HD
trucks.

I have a 2004 GMC Sierra SLE 4wd With locking rear diff.  I am
replacing the gear oil in the rear differential.  Does anyone know the
correct amount of gear oil to add.  The chiltons manual says to add to
within 5/8" to 1 5/8"  from the bottom of the fill plug.  That is fine,