| Thread | Last Post | Replies |
|
| Frozen/stuck caliper bleeder screw on 93 Chev G30 | 19 Nov 2006 20:05 GMT | 6 |
Hi, I need some advise on how best to deal with the above. I have tried a penetrating oil, tapping the caliper around the bleeder screw and use of a 6 point socket. I don't want to have to pull or replace the caliper if there is a simple
|
| ATTN: Beware of the Abominable Snoman! | 19 Nov 2006 19:27 GMT | 26 |
The abominable Snoman is a large hairy bubba like creature associated with the seldom snow covered regions of the Ohio between Indiana and Pennsylvania. He is also known as Snojob, Snoboy, idiot, and many foul names. One would think the sightings of the Abominable Snoman are rare ...
|
| 1986 Chevy truck slave cylinder | 19 Nov 2006 19:03 GMT | 2 |
How do we bleed the line and get some pressure to the clutch -- Stephanie Underwoo -----------------------------------------------------------------------
|
| Outside Heated Mirrors 2004 Avalanche | 19 Nov 2006 14:50 GMT | 7 |
If the drivers side outside mirror heats and the passenger side does not, am I talking a new mirror or a fuse or both? Dealer or after market. Fix myself or dealer. Thanks for any advice
|
| Changed Cabin Air Filter | 19 Nov 2006 14:46 GMT | 20 |
02 1500, got up energy to change the cabin air filter this weekend. Instructions downloaded from the internet mentioned 3 screws to remove bottom cover, whilst standing on my head and wondering why it would not come down, found the 4th screw. Removed the filter cover and could ...
|
| no brake lights | 19 Nov 2006 11:22 GMT | 3 |
My 1995 chevy c-1500 pick-up has no brake lights except for the light on the topper door. I am wondering what color wire connects to the brake lights so that I can check for power?
|
| 90 suburban, 5.7 tbi; hesitation with backfire | 19 Nov 2006 02:36 GMT | 18 |
Hi, I'm an ASE tech and I used to consider myself a bit of a specialist at solving drivability issues, but I'm stumped on this one. Hopin' someone out there can help me. The history: This 90 suburban, 5.7 TBI, has been setting for nearly 5
|
| oil filter housing gasket on a 1997 blazer s10 4x4 | 18 Nov 2006 22:51 GMT | 5 |
Does anybody know how to get to the oil filter housing gaskets on a 1997 blazer s10 4x4?
|
| Oil filter housing gaskets on a 1997 blazer s10 4x4 | 18 Nov 2006 14:17 GMT | 6 |
Does anybody out there know how to get to the oil filter housing gaskets on a chevy blazer s10 4x4?
|
| 2000 Silverado-Remove Bed or Drop Gas Tank | 18 Nov 2006 03:51 GMT | 4 |
I have a 2000 Silverado with a surging gas gauge and after searching the other posts, I see it is a common problem. My question is: what would be easier to do to replace the sending unit in the gas tank, remove the bed or drop the gas tank. For anyone that has removed the
|
| radiator | 17 Nov 2006 20:29 GMT | 6 |
How do I know if I have a heavy duty rad. 97 z-71 ,350 ,auto ,tow package, external engine oil cooler? Thanks
|
| Power Window '99 Sierra | 17 Nov 2006 04:43 GMT | 2 |
My drivers side power window is "off the track", I can hear the power motor operate but it doesn't move the window. I manually pushed the window up into the closed position. How hard is it to get the inside door panel off, and what type of repair am
|
| 98 S10 advice | 17 Nov 2006 02:49 GMT | 2 |
Looking at a 98 S10, plain Jane, 4 cylinder, 5 speed. Any thing to look for? The hood release handle is broken, but you can pull the wire with a pliers and get the hood open. Is that a big deal if I fix it while the wire still works? Also, the clutch has no free play. Is this normal ...
|
| 90 Suburban Remote Start | 17 Nov 2006 02:39 GMT | 11 |
I am hooking up a remote start to a 1990 Suburban R2500 w/ 5.7L. The one wire I can't find is the oil pressure switch or charging circuit switch. This wire needs to be pulled to 12V when the engine is running and grounded when the engine is not running (even if the ignition is on ...
|
| Distributor Cap Disintegration | 17 Nov 2006 00:57 GMT | 6 |
My 4.3L S-10 goes through distributor caps in about 90 days. The plug wire contacts inside the cap seem to get very badly burned and the truck starts to miss and backfire. A new cap solves the problem for a brief time. Any suggestions to why this is happening is appreciated.
|