| Thread | Last Post | Replies |
|
| RE engine start long crank problem | 29 Jan 2007 03:22 GMT | 6 |
Well guys it is the weirdest thing. I replaced all the lines , filter, and pump/tank ALL NEW !! you can barely hear the pump with 1/4 gas in it. The truck has never started in -10 below weather WELL !!! even with the lines totally empty.. it cranked about 10 times and started.. ...
|
| What is the best online truck parts site you've found? | 29 Jan 2007 03:19 GMT | 2 |
Someone posted a really awesome parts site here once and I saved it, but my computer crapped and I lost it and can't remember the name of it. Could someone please repost it? Thanks.
|
| 1990 Chevy C30 Bus | 28 Jan 2007 14:50 GMT | 6 |
Ok, my dad has a 1990 Chevy C30 that has been converted to a bus. I need to hook up the wiring for a trailer but I don't know where to start. Do I need to run wires from the front or is there somewhere in the back where I can connect them?
|
| Serpentine belt tensioner question (95 4.3L W) | 28 Jan 2007 03:39 GMT | 2 |
I am curious as to whether or not there's an easy way to tell if my serpentine belt tensioner is in decent shape?? It seems like the spring is gone as it's very hard to move. Are these adjustable? How easily should it move?
|
| Anyone have a vin code I can use for the snap on code scanner | 27 Jan 2007 23:46 GMT | 1 |
It is asking me for the 10th digit and so on. but this truck is an 81 .. it now has 1987 TBI motor in it thanx..
|
| '99 Suburban Interior Dome Lights | 27 Jan 2007 22:26 GMT | 1 |
I am having problems with my interior / dome lights that keep coming on whenever they want. The only temporary way to fix this is to use the dome override switch. I would like to have them working properly since I have 3 kids to load into the truck and can't see unless I turn ...
|
| 02 Avalanche Humming Noise | 27 Jan 2007 18:10 GMT | 1 |
I have a humming noise comming from what seems to be somewhere in the middle (transmission??) or towards the back of the truck (rear end??). When I am driving and giving it gas there is no noise but when I let up on the gas the humming starts. I crawled under the truck this ...
|
| wel guys..I am stumped! | 27 Jan 2007 13:22 GMT | 8 |
I thought I had my 350 TBI problems all solved.. The cursed roll over 10 times before I get a fire is back. I thought it was gone but today @ minus 25 with wind chill I tried firing my truck.. LMFAO NOT !!! she rolled over about 10 turns then you get the "almost gonna start ...
|
| collant flow back in to holding tank | 27 Jan 2007 02:35 GMT | 6 |
I have a problem with the collant flowing back to the holding tank wath can bee the course for that
|
| 350 tbi rolls over to much before starting | 27 Jan 2007 01:23 GMT | 10 |
as above. 1990 tbi 350 it rolls over 8-12 times before starting and is a bitch in the cold... it will flood before it will start.. I changed the oil, plugs (gapped @ 35) but it seems like no spark for 5-6 cranks then by the time it does, it is flooded.. Motor runs awesome once ...
|
| rough idling in cold weather 2001gmc sierra 1500 | 27 Jan 2007 00:59 GMT | 5 |
hi i have a 2001 gmc 1500 sierra 4 wheel drive in cold weather when i start the truck in the morning the engine races very high then it idles very rough and shuts off it will start fine again but continue to do the same thing until the motor completely warms up when the temperature ...
|
| 1995 Chevy s10 4.3 brake problems | 27 Jan 2007 00:52 GMT | 1 |
1995 Chevy s10 4.3 brake problems. Firstt he brake pedal will drop to the floor, then when I try and pump it up after this happens, the pedal only goes down a short way and stops, without engaging the brakes. This very rarely happens, and usually after driving it for 30 mins or more ...
|
| This engine was originally mounted in which Chevy? | 26 Jan 2007 23:57 GMT | 12 |
Thanks a lot if someone can provide some help in identifying which Chevy model this V8 Chevy engine originally mopunted in. Motor number : 0012524T56FA Roughly it tells me that it has serial no 0012524 and it was built at
|
| Brake controller hookup | 26 Jan 2007 22:03 GMT | 4 |
Can someone point me to the location of the brake controller hookup on a 2004 GMC C-3500? The owners manual doesn't indicate where it might be. thanks,
|
| won't start 89 blazer4.3 vortec | 26 Jan 2007 02:15 GMT | 6 |
OK hers the prob I got a 89 blazer with the 4,3 vortec and I managed to get the TBI to put fuel out and I have goten spark . The prior owner has put a timing chain in it so I pulled the valve cover and turned the motar and it seems to be in the right timing order--- The intake valve ...
|