Here's one for the body people.
I have a 92 Chevy Astro Van. The rear doors recently decided that I no
longer need to open them and they feel almost like they're locked shut.
They aren't locked and the lock mechanism feels like it's working, but

I have a 83 chevy truck that is a long bed. I want to have a section
cut out of the frame right behind the cab for the length of a short
bed, then weld and cup frame back together. Who does this kind of work
and how much would it cost? I will be able to fix the brake lines and

i need some more advise.  if i install 285/50-20 on my 02 suburban, will i
lose ride comfort?  according to a tire converter i will have a .88 mph
change in my speedometer.  if im going 65 with stock, i will be going 64.12
with the 285's.  i dont want to lose ride comfort, i can ...

I just got an 02 trailblazer and when driving in the wind there seems
to be a lot of wind noise coming from the top of front doors.
When the doors are open all the way it looks like the welds are loose
on the firewall pillar.

Today I was backing out of a snowbank in 4wd and my front hubs were making
a loud clickity-clack sound like something was gonna break. It's an
'86 K20 with manual hubs. Could it be the front axle u joints?

Blazer keeps dying after a short run on the road, In neutral the motor will start and run but when put into gear just moves a few feet and dies again, when it sits for a while its good for a few more miles, I have checked all fluid levels and they are all fine.
It was subjected it ...

My father purchased a 93, 1500 series from a friend.
His friend had it special ordered from the factory with a 350 and a 5
speed manual trans. Supposedly, he had them take the SS version with
the 454 and a 5 speed, and slap in a 350 instead. if that helps to

Hey all!! New here in hopes to finding some answers!!! I seem to be
having trouble finding out what is wrong with my 95 chevy s10.  I am
about at wits end with this thing so any input will be greatly
appreciated.  Here is the sinero:

I have a 1990 chev 4x4 the actuator wire was unplugged, the guy I bought
the truck from said it was broken... .I plugged it back in to try it but the
4wd does not seem to be engaging.. The light in the shifter to say if it is
in 4wd is not coming on either. I would like to test ...

Novice; have an '89 S10 , needs alternator; I see the three bolts on the old
one, but don't see how to release tension on the whole belt system.
(   Battery show 12.1 volts across  the terminals while truck is off, and a
bit less with the truck stated; even less with the ...

Help,
I've been going around in circles on this one. The original scan gave me a
code 161 and 300. so I changed the  Oxygen sensor. Now I get code 300, so I
changed the fuel filter, and the spark plugs. I still get code 300, Random

i am looking into installing a GPS/Navi system into my 02 suburban.  my
question is, i am looking at a few from pioneer, kenwood, clarion.  will a
double din unit fit into the stock location?  if it will, what do i need for
it to work?

Now that I have my catastropic failure addressed, another thing I
noticed on my recent trip is that at about 70mph, I start getting a
vibration, it's a very slow one compared to speed.  Kind of a whump
every second or two, on and off.  Doesn't go away completely in

Ok, I hope my '93 Suburban works out well for me.  I'm going to do a bit
of work on the front end before I take it in to get it aligned.  The
steering seems to have a bit of play in it. Simple question, I hope,
it's just something I've never addressed before.

I'm not sure how to put a different name on newsgroups so could someone help
me? I'm old and drive an old Truck and not sure how to do this so please
help if you have time.
        Wayne