Does anyone know the model year cross applications for a '94 steering
column?  I figure there's a fairly wide range that will physically fit,
but I am concerned about the electrical connections matching.  Anyone
have any experience with that problem?  Thanks!

I am looking for A set of 9.75 X 16.5 rims for
BFG Mud TA's 35x12.50x16.5
need help on the off set spacing on the wheels ?????
1981 K20 HD 8600 GVW

I bought a '99 S10 new - currently have 97,000 miles.  I'm not particularly
happy with this truck.  Replaced:
1. drivers door hinges
2. starter

HOW DO YOU REMOVE THE RADIATOR SUPPORT?

I am looking for cheap yota will be willing to make a deal looks dont
matter and I can find cheap stereo speakers

There is a noise coming from the drivers side dash that has been getting
progressively worse as time passes. When the road is even slightly rough the
dash rattles like hell. I bought the truck used 3 years ago with 33,000
miles and it had the rattle but it was very mild. Now it ...

I've been reading this newsgroup for years now, enjoying the helpful advice.
I've gotten to the end of my rope with this particular problem and I'm
hoping someone out there can help.
I have a 1995 GMC K2500 with the 5.7L TBI.  The truck starts fine when its

Hope someone can help here. This engine is actually in a Mastercraft
boat.(The dealership is worthless) It’s a `99 5.7 liter with a throttle
body. The engine turns over but wont fire. Plenty of fuel coming up but
nothing getting into the engine. Engine runs fine if we squirt fuel ...

I would like to ask the group for some advice and experiences buying
goodwrench motors from non dealer suppliers or possibly sticking my neck out
and buying a rebuilt [cringe] motor .  made arrangement to have a motor
installed -w- local garage. placed an order  with gejs. ...

Ignition switch is jammed in the run position.  I can turn it CW to the
start position and motor starts, key returns to run position and truck runs
fine.  The key will not turn CCW and I have to let out the clutch to stall
engine.   So I am trying to remove switch.  Got the steering ...

So I picked up a cheap vehicle off craigslist - well, because that's
all I could afford. First, it was not starting intermittedly. Now it
won't start at all.
When the problem was still once in a while - I took it into an auto-

My Carter in tank pump went out the other day.  I had 30,000 miles on
it and just short of two years.  It was in my chevy 1998 1/2 ton.
After talking to the mechanic that installed it (In another state now)
I found out I am not the only one with a problem with the carters.  I

I need a new transmi\I ssion for my 1991 GMC Sierra 4x4 but I am not
sure what type. I have been told that I can use a 700R4 or a 4L60 but
I am not aware if there are different variations of the two and if so
which type I will need for my truck.

I took my truck in to the garage today because I've been hearing a
"scratching" or light grinding noise in the past week...even when I
don't have the brake pedal pushed.
They told me my rear calipers (I think he said both...I don't remember)

I have a 96 Chevy Suburban 4WD that has over 200k miles. At about 90K the
transmission went out and was fixed under warranty. At about 180k the
transmission went out again and was rebuilt. Reverse recently came out of
the vehicle and the transmission again needs work. The vehicle ...