Working on an exploder 1997 and the fron is noisy. I know the fluid is
laeking and low.. If I repalce the pinion seal and refill it with 90w does
anyone think it will get quieter ?.. It isn't that bad but noticable while
driving.. OH the front tires are fudged to hell.. I thought ...

the make and model is a 2 ton chevy truck , year 1988   5.7 L --
wanting to build motor for a bomber stock car-   i need to know if hp
will get me started? thanks

I'm mad enough to piss molten stainless steel. Two thousand bucks in
bills from two incompetant mechanics, the first who "rebuilt" my carb
(a 4 barrel Rochester), claiming the float was stuck. Maybe it was or
maybe it wasn't, but before he got hold of it, that engine would start

I tried the acetone bit, but couldn't tell any difference in the
mileage. Got a
quart of acetone from the paint section of a department store.
Anyone actually

Could one or both of you please drop me a line, I have yet another
question for you about my T-Case?  I know where the leak is coming
from and have tried to stop it but it won't, so I wanted to see if
either of you had suggestions.

My tow/haul switch stays on and i can't get it to turn off. It is killing my
gas mileage. Any suggestions on how to fix it?

ok...did something really dumb.  I towed my 2002 Tracker 4X4 AT with the
tranfer case in 4wH.  Now it will not move in drive but will work in low and
reverse.  What have I done?    Tranfer case or transmission or both?  The
transmision was in Nuetral.

Can someone point me to a link that explains how GM is implementing this
feature in their cars and trucks?  Thanks

Haven't done that much driving on deep sand - mostly down at
Hatteras... but never came close to getting stuck.   The thing
always seemed to just churn it's way through even seemingly
hubcap-deep sand.

I have a Reese brake controller and want to install on my 2007 Silverado but
it has to be hard wired, which wire goes to what? The reese has four wires,
they are Power, Ground, Stop Light, and Brake(blue).
Tks

About 1/2 hour after it was off the wrecker, I noticed the front hubs were
hotter than a son of a ......
I tried putting it in 4H and 4L, but the auto hubs don't feel like they engaged.
In the mud, only the rear wheels would slip - it was definitely only in 2wd.

Here is a good deal on one:
http://cm.ebay.com/cm/ck/1065-29296-2357-0?uid=21526924&site=0&ver=LCA080805&ite
m=190110581506&lk=URL

looking to find away to build my auto tranmission

Hello. I replaced the oil filter adapter on my 350 today. I'm a littl
confused as to whether it needs a gasket or not. The new part didn'
come with one although the instruction sheet says it comes with/need
one. A book I have says no gasket is needed. Which is correct? Gasket o