| Thread | Last Post | Replies |
|
| Is a Chevy good for hunting dinosaurs??? | 07 Jun 2007 16:43 GMT | 1 |
I'll go dinosaur-hunting this summer and I wonder if a Chevy is good for that. Can I shoot a lot of dinos or will they bite my a.s???
|
| cannot find parts for my truck | 06 Jun 2007 05:34 GMT | 7 |
anyone have any luck finding parts for a 1986 chevy S-10,V-6,2.8L W/AC,elec. windows,2 door,long bed,2wheel drive? every search turns up the 2.5L or the wrong year.
|
| Washers on spider gears 03 Chevy TB rear end | 06 Jun 2007 05:16 GMT | 12 |
What the hell would cause spider gear washers to disintegrate after 52K miles? Fluid was fine, I don't drive around in circles, burn rubber etc. They sure don't make this sh.t like they used to.
|
| AC low pressure valve replacement | 05 Jun 2007 05:22 GMT | 5 |
Can I replace the AC low pressure valve myself? It looks like a bicycle shrader valve. I heard there's a tool for replacing it under pressure? If this is not diy, how much should a reasonable shop charge? I have a 96 K1500 Suburban 5.7L. TIA!
|
| 83 pickup 4.1L Straight 6 "Overheat?" | 04 Jun 2007 23:57 GMT | 8 |
My good old 83' GMC Pickup has had a funny symptom for 2 years that is getting worse, and I hope you guys have a clue... On a long high-speed highway uphill, the temperature gauge goes up a little, maybe to 190 from about 180, then suddenly pins full scale
|
| diff between s10 4.3 starter and 350 starter? | 04 Jun 2007 20:35 GMT | 1 |
Wife's got an older `89 s10 with a 4.3 automatic, I've got a 78 c20 with a 4-speed something-or-nother. Her starter just pooped and I've got a brand new NOS starter for the 78 sitting in the shop with dust and cobwebs. Looked for part nums and illustrations to match up before
|
| is my trans going bad? | 04 Jun 2007 19:53 GMT | 2 |
My 1995 Tahoe has 130,000 miles on it and I pull a 18' enclosed trailer (with racecar inside) several times a year to races 500 miles away. I've heard so many people complain of having to replace their transmissions that I've started to worry about mine. Is there going to
|
| Turn Signal ASSY | 04 Jun 2007 17:39 GMT | 1 |
1988 Chevy Silverado 350 Engine 700 Tranny 2WD I just changed the turn signal assembly and horn components on this truck. Everything came off okay but putting it back together is a problem. There is a spring that I can't completely compress. I have no schematic but it
|
| 2000 Silverado starting puzzle | 04 Jun 2007 00:33 GMT | 3 |
Haven't been checking in here for quite awhile, but now have an issue I didn't see brought up already that's exactly like mine. There's been other "no start" posts but mine is confusing. I have my "message center" blinking at me with various warnings now, along with an ABS light ...
|
| really need all your guys info on this one | 04 Jun 2007 00:27 GMT | 4 |
Bought a 1968 Pontiac Parisienne and it has a rebuilt 327 OR HE SAID ?? casting 3914678 says it can be a 302, 327, or 350. so here is my question... it has the intake , a 4brl intake with th oil filler in the intake like the 283 and 327 should.. any way to tell if it is a 350 ?.. ...
|
| ticking blazer | 03 Jun 2007 16:35 GMT | 3 |
got a weird problem.....i have a 98 blazer 6 cyl. 90,000 mi, directional flasher clicks whenever ignition is on, directional lights do
|
| 1998 Chevy 4x4 | 03 Jun 2007 13:24 GMT | 1 |
I was in the process of installing brake control module for my camper and found 20a fuse 1 for stop lights/hazards blown. It keeps blowing no matter what I try. Hazards work fine and door ajar is good but as soon as I hit brake pedal it blows. Not sure if I did something with ...
|
| water dripping | 03 Jun 2007 11:52 GMT | 2 |
Hi all,, I have a 2002,Chevy Silverado,had the ac running,,air flowing to floor,,,after a while ,I had water dripping on passenger side floor,,,if I have air flow to top vent,,np,,if I flow top and floor,,np,,,only floor,,had the water,(condensation) I am wondering if there is a ...
|
| '03 S10 ZR5 4.3 Stalling, hesitating, loss of power | 02 Jun 2007 18:45 GMT | 8 |
I'm at my wits end on this one. I have a 2003 S10 zr5 with the Vortec 4.3l that for about 3 months now has been hesitating, stalling and has had an extreme loss of power. Sometimes I fear for my life when leaving an intersection and it decides to loose all power. The truck
|
| Jimmy problem | 02 Jun 2007 13:03 GMT | 3 |
Sorry for the repost but I did not receive any replies to the first. There is a noise coming from the drivers side dash that has been getting progressively worse as time passes. When the road is even slightly rough the dash rattles like hell. I bought the truck used 3 years ago with ...
|