Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / July 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
93 4.3 W S-10 Blazer Crank Seal?05 Jul 2007 14:43 GMT4
I just pulled the front pulley on the crank and oil ran out.Does this
mean the front timing cover seal is shot?Also will I have to pull it off
to replace the seal?
Thanks Guys!
96 k1500 tranny problems05 Jul 2007 03:20 GMT2
Hey gang, I have a 96 silverado with over 146k miles on it.  I am having
trouble with it frequently shifting out of overdrive.  When it does go into
o/d, it bucks a little.  I changed the filter and fluid.  What is next?
1990 GMC Sierra Back Up Lights04 Jul 2007 22:55 GMT7
Thanks to anyone that can help. Truck is a 1990 GMC Sierra with 5.7l
V8 and auto. The back up lights as well as the rear cargo light on the
cab don't work. I checked the fuse and it looked good but I changed it
anyway. The lights still won't work. Any ideas on what to look at ...
93 S-10 Oil Filter Cooler Lines?04 Jul 2007 16:46 GMT6
Could someone tell me what would be the best option on replacing these
lines?Would it cost a lot more to take the old ones to a shop and have
new hoses recrimped on?
Thanks!
Timing chain setup 2.2L 4cyl04 Jul 2007 02:35 GMT3
I am replacing a timing chain on a 2.2 liter Sonoma 2wd. The timing mark on
the crankshaft sprocket looks like a little drill mark. I think this is
supposed to line up to the tab on the tensioner. The mark on the cam
sprocket is the one Im not clear on. What does the mark look ...
Snoman.. heres a good one for you.. what cc are these ?03 Jul 2007 19:40 GMT7
3998920 casting ,  1.94. 1.50 valves.  I know they are 72-73 heads but no
listing on cc's.. these are the ones going on the  237 0.60 block
hi chev guys.. Need some more info on a motor I just bought03 Jul 2007 12:55 GMT10
Bought a 69 327 for $400 totally rebuilt.. looked and ran like it did.. he
said it was a "stock" rebuild... WELL !!! I pill the heads off.. 1.94
valves.. kinda a pisser but then see flat top pistons and 0.60 on em.. I
think damn....can't rebore it.. so I think positive.. it is ...
2003 Silverado won't idle02 Jul 2007 16:20 GMT2
No service engine light but wants to die.  Okay once up to speed but
wants to idle at 500 or so and then die.  Could this be a problem with
the idle air control?  If so, how hard to service?  Looks like the IAC
is right on the front of the throttle body.  TIA for any input.
Speedo and tach problem02 Jul 2007 16:00 GMT1
96 K1500 the tach and speedo are only working intermittently, they are
not accurate when working, and the check gauges light comes on.
Any idea where to start with this one??
Thanks,
1988 Dully rear end ?02 Jul 2007 14:25 GMT1
I have a 1988 R30 Chevy 1 ton dully with a 454 Fi motor. Can anyone tell me
what rear end would be in this truck. I am thinking about changing the gears
from the 4.11s to 3.55s.
Fuel Pump?02 Jul 2007 04:19 GMT1
The engine will sometime die in my 96 Chevy truck while cruising down the
highway. It will only start back up if I turn the key off and back on again.
Any suggestions would be appreciated.
ABS & Transmission problem at same time02 Jul 2007 03:11 GMT4
I was driving in the rain and ran thru a big water puddle. Right after
this, I had the following problems immediately. My speedometer quit
working, 3 & 4 gears were lost, and my abs quit working. When I hit the
water puddle, it was raining really hard, I let off the brake right ...
A/C problems02 Jul 2007 00:50 GMT1
I have 2 problems with my a/c..
Frist is I have been having intermittent warm to cold with my a/c.. Ive had
it evact and recharged and checked for leaks, all is ok. I was told its
probably the temp blend door or motor. I pulled the ashtray area and
93 S-10 Blazer 4.3 W Exhaust Manifolds?01 Jul 2007 15:58 GMT2
I finally got around to taking the cracked manifold off..what a
job!Found out the passenger side was cracked in 2 places..there where no
gaskets behind these manifolds.Why would that be?
Thanks for any info!
UNDERWEAR LINGERIE01 Jul 2007 10:12 GMT15
Lingerie is a term for women's fashion underwear. It derives from the
French word 'lin' for linen. While the term in the French language
applies to all underwears for either sex, in English it is applied
only to those women's underwears designed to be visually appealing or
Pages: 1 2 3 4 5 6 7 June, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.