Real life owners of 07 GMC 4WD 5.3(LH6), 3.73, Z71...Unloaded city and Hi
Way.    Window sticker 16/20  TIA

I do not have a book on it or can I afford one.

91 Sub has about 190k miles on it.  Runs fine except for a new problem that
just started.  Engine started missing badly over the weekend after replacing
the EGR valve, EGR modulator and TPS.  Miss is most noticeable when engine
is cold / warming up and during acceleration.  Seems ...

I have a 1996 Chevy Blazer.
The bracket or 'mount' to the lower control arm broke that connects to
the front torsion bar.
I am replacing the whole arm.

I have a 700R4 which needs to be rebuilt.  I have been told that the tv
cable on that particular transmission should probably be installed by a
pro.  I have also been told that the cost of rebuilding the 700R4
(including paying someone to properly install the tv cable) and

How much angle are these supposed to run at?
I like to run the torsion bars pretty tight to get more lift.
But now my CV vibrates and the Boots split .
How hard is it to replace them?

We just purchased a 95 Chevy pickup and before we purchased it we had
it checked out by a mechanic.  They said that the water pump would
need to be replaced soon as well as the power steering pump.  They
also said something about a valve gasket needing to be replaced.  My

I need to replace a failing cam position sensor.  I have the 95 W series
vortec motor.  Is this sensor removable/replacable if I pull the dizzy cap
and rotor out or do I need to pull the whole damn thing?  Is this a 15min
job or something I need an afternoon with a half-dozen beers ...

My 94 chevy truck with a 305 idles at 500 rpm in drive with brake on.
Idles at about 800 in neutral.  When I hit the gas it spits and
spuuters.  If I ease into the gas it takes off fine.  Once it is
running down the road, everything is fine.  I was gonna just turn up

Been told that you're off topic? Just engaged
in a pissing contest? Well, you're in the right place. You're
just worthless
trash that doesn't know when to shut face. Quit filling my boots

Ok...ive got the proper sized wrench and a mallet...but how do i keep the
shaft from turning?

first off, thanks for those that take the time to read this and
reply.
Im the owner (not builder ) of a 91 S-10 blazer that was converted
from a 4.3L to a 5.7L 350 engine. Im pulling the pan tomorrow to

Concord,ca  Police Ron Turner is a fucken dirty black
pig cop who stops people that have 820lbs. in a F150
and First the cop called for chp portable scale to get the
wt of my truck he could not get one then he had me

I am right now camping out with my family.
We are currently using my father-in-law's 1974-model Puma tent trailer. I
think it is 11 feet long and weighs about 2,000 lbs unloaded.
It is really showing it's age and I'm thinking of buying  something newer

Been told that you're off topic? Just engaged
in a pissing contest? Well, you're in the right place. You're
just worthless
trash that doesn't know when to shut face. Quit filling my boots