I used to do all my own tuneups and most repairs.
No way I've kept up on the technology though.
I have a chevy  1997 s10 2200 2.2 liter with air and automatic.
I know where the air filter is and change regularly.

My 91 recently failed.  It has long tube headers with a brand new heated O2,
otherwise it is stock and in good running order.  Any ideas on what to check
on based on the results?
           Standard     High Speed     Standard     Low Speed

I am looking for windshield wiper blade refills for my 1998 Blazer & I can't
seem to find them for sale anywhere at the local stores.  They only sell the
blade unit complete with the rubber only, no refills anywhere. Am I the only
one looking?  Do I have to replace good arms when ...

i have a 1979 k5 blazer with a 350. just put motor bake together from
a head gasket job. now the trans wont shift into overdrive. the trans
fluid is new and full. any advice needed. thanx.

I have an '02 S10 which I've replaced the third door inner handle two
times now and it just broke again after about six months use. When you
get a replacement from GM thewy only wrranty it a year from the
purchase date of the original replacement. I guess what they're saying

Years ago when I was a wee lad........
My pop showed me how to make home made
bazookas outta the beer cans lay'n around his shop.....
using cigarette lighter fluid and duct tape............

Trying to replace lower ball joints on 1998 Astro Van hae bought the tool to
press them out as well as tryed a sledge hammer still not budging anyone have
any other ideas to remove these Thanks

Hey to all...!!! My '94 S10 Blazer's 4wd is not working. I know this is a common
problem, I just don't know the solution. It has the electric engage and will not
engage. The indicator lights for the 4wd do not illuminate. Can someone give me
some ideas for repairs???

I am not  going to start a thread on oil and Filters.  Just a question about
the quality of the PF-46 filter.
It is now the replacement of the PF-59 and I was in the market to get a few
for my truck.  I went to several parts houses to check the price of oil and

My '98 'burb - 150k+, never had a wheel bearing replaced - has
started making a rotational-related noise.
Gonna take it to the shop tomorrow, but my money is on their
telling me that they can't hear anything.

i have a question.  i bought a 08 silverado crew cab.  i want to install a
2.5" front leveling kit.  what will this do to my front suspension warranty?
also i have been told, if you want to add dual exhaust, as long as you
modify from cat back, it will not void your warranty.  is ...

can someone direct me as to where find updated (2007 or 08) GM RPO codes.  i
have found a listing of them, but not all my RPO codes are listed, and some
that are, are not up to date.
Thanks

I am having trouble getting the timing on zero on the crank damper it runs
best retarded what do i have to do to get it timed to zero on the
damper???? thank you

I think I have a electrical problem causing my  torque sensor to trip, how
can I have this checked, or how do I check this?

Front end vibration.
Looking for information, If any body has experienced wheel vibration.
My truck seams to continue to bounce more than it should when you go
over a bump. Also  the wheel seams to vibrate at 65-70 miles an hour.