| Thread | Last Post | Replies |
|
| 1988 S15 wil not start. | 23 Jan 2008 05:36 GMT | 4 |
Greetings all, Let me preface this with my admitting that I am not a "car guy". I have a basic understanding of how things work, slightly above average understanding of electrical circuits and probably way too many friends/acquantinances with
|
| how to identify year of 350? | 22 Jan 2008 17:56 GMT | 2 |
my parents are going to look at some old camper, owner claims it has a 1997 350 in it. Anyway to verify this? First I thought the obvious was to make sure a carb wasnt sitting on top but this might not be the case as I'm guessing you can buy a intake/carb and put that onto a FI ...
|
| '97 GMC 4.3L V-6 with 4L60/E tranny | 22 Jan 2008 03:54 GMT | 3 |
Hi all. I hate my tranny...lol I hate it with a passion. It will go into reverse with no prob, go into 1st with no prob and that's where it all stops. It won't go into any other gear. Even if I try to manual shift I get nothing. Been told I should rebuild it, been told to
|
| 1984 Chevy 1500 Transmission help. | 21 Jan 2008 02:22 GMT | 2 |
I have a 1984 Chevy 4WD, 1500. Auto transmission. I've never had any problems with the truck except for normal maintenance. When I pulled from the house today the transmission when it started to
|
| cargo management system | 20 Jan 2008 21:15 GMT | 1 |
I just bought a new GMC Sierra Crew Cab. I am interested in the cargo management system that they sell as a dealer installed option for Chevy's and GMC's. Does anyone have any experience with it? Also, it has an MSRP of $95, but now that I have already bought my truck, they
|
| Mileage.... 08 1500 | 20 Jan 2008 15:29 GMT | 4 |
Anybody got a reasonable set of mileage numbers on the 08 1500 Ext Cab w/ 5.3L work truck?
 Signature Sincerly,
|
| Trailblazer Headlight | 20 Jan 2008 02:26 GMT | 1 |
Sorry if this is redundant but I have a question about removing the headlight from an '03 trailblazer so I can change the bulb. Is there a way to access the light without removing the grill? Either way does anyone know of a website that explains how to get in there?
|
| 1997 GMC HD3500 6.5 diesel Won't start | 19 Jan 2008 17:09 GMT | 1 |
1997 GMC HD3500 6.5 diesel Truck will not start, or starts, then dies in a second or two Tried new glow plugs, fuel pump, fuel filter, air cleaner, full tank Fuel comes out the top of the fuel filter when the small black cap is
|
| Chevy Changes Rear Brakes Disc Back to Drum? | 19 Jan 2008 15:50 GMT | 3 |
Anybody have any information on why GM went from rear discs back to rear drums? Would prefer links to official statements or magazine articles or reviews as to this issue.
|
| Keyless Remote questions 2003 Silverado | 19 Jan 2008 01:21 GMT | 3 |
I am perplexed. I just bought two NEW keyless remotes for my '03 Silverado from a dealer using Ebay. The programming instructions were found at www.programyourremote.com I have followed these instructions to the letter and cannot get these things to
|
| 2004 Yukon Cig apadptor not working HELP! | 19 Jan 2008 01:00 GMT | 3 |
Plugged in a lunchbox stove to the cigarette lighter adapter 12 volt acessory. Was cooking up some stew. Wanted to make sure the battery was not getting low, so I started the truck. As soon as I started the truck, the stove cut off. Now, there are two
|
| 2007 chev aveo | 18 Jan 2008 19:45 GMT | 2 |
is there a chev bord to post stuff about it on it has anyone owened one? iso any good words or bad words on it other then its good on gas BAIN15
|
| Need new radiator, Can I install one with an oil cooler?? | 18 Jan 2008 17:07 GMT | 1 |
My radiator is cracked at the plastic housing on the drivers side. I currently have it repaired with some JB weld. It is holding pretty good but I know it will only last so long. My current radiator has the tranny cooler lines on the passenger side. But I have seen in my
|
| Please Help me Diagnose my problem!! | 18 Jan 2008 04:02 GMT | 4 |
Ok, so I have been trying to get my 89 s10 4.3 4x4 to stop bogging down and loosing power. Here is the history of the vehicle. I am not a mechanic, but I am pretty a pretty good DIYer and can do most jobs that involve basic skills, tools and elbow grease.
|
| 1987GMC fule pump | 16 Jan 2008 00:22 GMT | 8 |
I have 1987 GMC 1500 in tank fule pump with no power. I changed fule filter ,fule punp, fule line relay and the ECM. I'm at the point now that I'm thinking of running a hot line to the punp side of the plug back to the fuse box.
|