| Thread | Last Post | Replies |
|
| Shelters concrete vs. steel shelters | 18 Feb 2008 20:15 GMT | 5 |
I live in Jackson Tenn were we just had a big Tornado. I'm looking at a Concrete Storm Shelter for $2,400 vs Steel Shelter for $7,000 the same size. I was told by the steel people that the Concrete will leak through over
|
| can't get 4.3 TBI to start | 18 Feb 2008 02:31 GMT | 1 |
Hi all. I swapped an 88 TBI 4.3 into my toyota and I can't get it to start up again. It was running before I pulled it so I know its capable. The only thing I did to the internals is change the valve guide seals, and have since readjusted the valves twice just to make
|
| Reason for poor gas milage | 17 Feb 2008 14:19 GMT | 2 |
I had a 1995 Silverado Z-71 with 350 engine and throttle body. Got about 13 mpg. Changed engine due to oil consumption. Still got around 13 mpg. Now I have a 1995 Seirra 4x4 with 350 throttle body engine and still
|
| Engine won't turn over when hot (99 S-10 4cyl) | 17 Feb 2008 03:06 GMT | 6 |
Starter or ignition or.......... Starts right up every time first thing in the morning or after it sits for awhile. After that, its 50/50 whether the starter will kick in. As if there was no battery at all. Turn the key..., nothing. Battery is
|
| Adyusting hydraulic valves???? | 16 Feb 2008 14:58 GMT | 6 |
1989 chevy 2500, 350 V8 Replaced head gaskets, need to adjust the hydraulic valves The books say to set piston at TDC, tighten valves till you can't turn the push rod. Then the books differ: One says to go an additional ½ turn.
|
| 1986 S-10 | 15 Feb 2008 17:39 GMT | 13 |
1986 chevy S-10, throttle body efi, 2.8l, 2 wheel drive, auto trans. fuse on juction box under hood on firewall will blow out about once every two weeks. starter turns motor but fuel is cut off. when I replace the fuse it starts and runs strongs for another two
|
| Gringing while turning the Crank question. Need help please | 15 Feb 2008 17:34 GMT | 7 |
1992 Silverado, 4.3L Was driving home and the bearings on the tensioner pulley broke and the pulley and belt both blew off. I coasted to the exit and into a gas station. Opened the hood and saw the pulley and belt missing. Truck was not yet overheated, thank
|
| Windshield wiper motor on 2500 | 15 Feb 2008 05:16 GMT | 1 |
Has anyone had problem with the windshield wiper motor (or where the linkage attaches) making noise when the wipers are running? I just noticed mine starting it today, it sounds as though the linkage is coming loose from the motor. It makes a noise every time the wipers switch ...
|
| Heated mirror problem | 14 Feb 2008 22:48 GMT | 4 |
2003 Silverado 2500HD, right side heated mirror has stopped working. Is there a simple fix here, common problem and so on??? Drivers side mirror is still working fine. Just the passenger side not working.!!! Mike
|
| whiny transmission | 14 Feb 2008 19:06 GMT | 3 |
i have a 1994 1\2 ton one wheel drive truck,automatic chevy that is and i have a whining sound when in gear and moving , also it hisitates when put in gear before it ingages , how long? and whats wrong ?,
|
| Replace ignition switch on 99 S-10 | 14 Feb 2008 01:01 GMT | 2 |
Anyone have any experience? Difficult? TIA, Frank
|
| 88 s15 starter. | 11 Feb 2008 13:58 GMT | 1 |
yeah, i've got a problem replacing the battery cable going from my positive to the starter. the bolt that holds it on is in such a place where i simply can't get to it. i've opted to just remove the whole thing, but i have no idea where to start. could anyone help me?
|
| PING: Marsh, Ian or RK | 11 Feb 2008 04:14 GMT | 2 |
Do either of you have a PDF or XPS of a service manual for the 4L60E? I am going to be installing the trans-go kit and would really like to have the important section of the service manual just in case. Thanks guys
|
| 1994 K1500 dash electrical oddities | 10 Feb 2008 17:11 GMT | 1 |
1. When cold, turning the headlights on will result in immediate headlights, but a 10-20 second delay in the dash lights. At the same time, there will be a 10-20 second delay in taillights as well. --Headlight switch was replaced. Same issue resulted.
|
| 2006 Tahoe Build Codes/Service parts identification | 09 Feb 2008 16:03 GMT | 1 |
New member here. I'm a bit lost on this forum. I am looking for th build codes or service parts identification for 2006 Tahoe. The sticke is in the glove compartment, has about 100 codes and I'm trying t figure out what they all mean.....just bought the Tahoe. Any assistanc
|