Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / April 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
2005 GMC saffari30 Apr 2008 21:22 GMT5
two wheel drv 4.3 problem abs light on brake light on dash on look at
gage light on { I am thinking abs module ] but its a $600.00 fix Brake
are good just had rear replaced what do you guys think
1989 k-1500 acceleration problem30 Apr 2008 18:30 GMT2
I have a 1989 chevrolet k 1500 4x4 truck with the 4.3 L TBI Engine.
When accelerating, the truck seems to stumble/hesitate.   It almost
feels like the truck is bucking up the road.  It will do this if you
hit the gas hard, but stops when you let off.  Put new plug wires on
96 Suburban K-1500 - Ignition switch removal - HELP28 Apr 2008 22:50 GMT1
I am about to pull my hair out.. .all 3 strands... I have a 96
Suburban that was almost Grand theft auto.. due to the dumb theives
award, they failed... but messed up the column... the cylinder is
still intact, but when the key is inserted, it will not turn... I need
window drive motor28 Apr 2008 12:29 GMT15
90 Blazer Full Size. How in the devil do you get the gol dang motor
out?
There is a hole there I can just barley squeeze my arm through, I can
feel the motor down there, just cant figure out how to get the dang
1990 Blazer power steering pump pulley28 Apr 2008 07:23 GMT5
I can't find a pulley installer to borrow or rent.
I think I can use a bolt, spacer and nut to install it without the special
tool.
Does anyone know what size bolt to use to install the pulley?
SHOCKING AUTO NEWS28 Apr 2008 05:36 GMT1
How to Convert Your Car to RUN on WATER
as well as Gasoline - Triple Your Mileage - and save over
60% on Sky High GAS PRICES http://yosuccess.centemax.hop.clickbank.net/
1990 Blazer water pump27 Apr 2008 01:16 GMT2
1990 full size, 350 tbi, auto, AC, serpentine belt.
Do I need the reverse rotation water pump?
john
Wiring Diagram26 Apr 2008 13:13 GMT9
Am looking for a wiring diagram for the rear windshield motor on my
1997 Chevy Blazer 4X4.  Have searched the net and came up with
nothing!!  Any help would GREATLY be appreciated!
Tony
1992 S10 heater problem??26 Apr 2008 12:23 GMT3
I have a 1992 S10 Blazer.  It is 4wheel drive, four door Tahoe version.  It
has the 4.3 TBI with 354,000 miles on it.
The air seems to blow through the defrost all the time.  Air does go through
the heater and vents but still comes through the defrost.  I looked at the
'08 Silverado gas mileage25 Apr 2008 02:00 GMT11
We're considering the purchase of an '08 Silverado (6.0L, 4X4) 2500HD.
What kind of gas mileage can I expect if driven conservatively? About 20% of
the mileage is towing a 5,000# camper, the remainder is around town. We
currently have an '02 Silverado(6.0L 4X4) 1500HD and get ...
1998 Blazer auto tranny cooler line24 Apr 2008 01:30 GMT2
How difficult is it to replace the cooler lines from the automatic
transmission to the radiator?  Where is a good site to order the
tubing from and does the tubing come with the necessary connections?
Thanks a million.
Intermintent miss/Rough idle after overheating22 Apr 2008 12:18 GMT2
I have a 1997 GMC Yukon w/5.7l engine, SLE package w/160,000 trouble free
miles.
During a trip to meet friends in Canada, my wife was driving and noticed the
temp
98 blazer blower motor resistor22 Apr 2008 05:41 GMT1
I just took it out, and then realized after directly putting power to
it that the motor still worked, but before this it did not.
How do i check the resistor?
99 GMC Suburban - EGR Issues20 Apr 2008 21:10 GMT17
I just replaced the EGR valve in my 99 Suburban (K1500 - 5.7L) …
again.  I am wondering if there is something else that I should look
at.  I would imagine that the new valve could fail as well (because
there may be some other problem)
New Fuel Pump - Now Hard Starting20 Apr 2008 01:47 GMT8
I have a 99 Suburban K1500 with the 5.7 liter vortec engine. 7 days
ago it would not start. It would just crank and crank. I had it towed
to my mechanic and it turned out to be the fuel pump. He replaced it 5
days ago and all was well until 2 days ago. Since then it has been
Pages: 1 2 3 March, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.