Hello, i cant seem to find the location of my Fuel Pressure Regulator.
i have a 1999 s10 blazer 4.3v Vin "W". can anyone help   thanks

I just got a small motorhome on a 2002 3500 Chevy chassis. It's a 350
with 410 gears. Gas mileage is around 9 mpg. Is there a problem
switching to say a 373 or something similar? Thanks

Hey folks,
Gotta dilemma that has stumped a regular ASE shop, the dealership, and
another entirely different ASE shop for over 2 months now.  I have a 1994
GMC 2500 2 wheel drive standard truck, no AC with a 305 in it.  My brake

Thinking of buying a 1991 chevy van with the full (gladiator)
conversion; low miles (92k) excellent condition, new tires, very clean
for just 2K. We are "test" driving it for a week or so to make sure my
wife is comfortable with handling. Our kids already love it. It gets

I just took my truck out after sitting for a week. When I got to the corner
it acted like the brakes were not going to work at all. After I got around
the corner I noticed the ABS light was on. The next couple of stops slowly
got better, I think the brakes are working O.K. now, ...

I noticed a smell of gas under my 1985 S10 Blazer hood on the right side
after a fill up, but I don't see any leaks........ is it possible that this
smell is coming from some vent like a gas vent emmision thingy?

I noticed recently that both driver and passenger side doors have
begun to sag. While still being able to close, the kids are having a
hard time closing them fully. Is there a way to adjust them, or fix
the problem?

Can anyone tell me if a heater coil from a 1986 chevy pickup will fit a 1996
chevy pickup?

My 2005 Silverado was aligned according to specs in the factory (Helm)
service manual, and everything seems fine.  I found that a TSB exists for
amended alignment specs.  What changed?

If there are only about three companies making batteries now-a-days then who
makes Delco batteries?  Way back when we had WD (through our hardware and
autoparts store) pricing for AC/Delco parts (15-20 years ago) we sold Delco
batteries, and of the various types we had sold we ...

Does anyone know where I can get an shop manual for 1967 c50 Chevrolet dump
truck?
Thanks,  Robin

Does anyone know where I can get an shop manual for 1967 c50 Chevrolet dump
truck?
Thanks,  Robin

I have a 1984 Chevy C20 pickup. I replaced the front pads & calipers.
The driver's side caliper does not release. What do I need to do?
P.S. Take it easy on me, I'm pretty auto repair impared.

I have a 1996 chevy 1/2 ton pickup that is leaking antifreeze from under the
passenger side dash board.  There is no leaking outside in the engine
compartment just inside under the dash.  Does anyone know what's going on and
how to fix it?  Thanks John

I am trying to buy headers for my stock 305 engine on my 82 scottsdale
truck. But some headers mention on the description that they don't fit
"angle plugs, what engines could have these? How do I know if my plugs are
"angled" or what direction would they be pointing if they were ...