When I use my turn signals, they flash extremely slow (once every 8 seconds), I bought a new flasher unit for like $2 or $3 but that didn't work. Any help would be appreciated.
Bobby D

First, excuse my poor english, I'm French.
I own a Chrysler Voyager 2,5 l CRD since april 2001. (I think this minivan
is named "Caravan" in the US)
This one does not have the cruise control factory installed, but the wirings

i have a 94 voyager with a torn balljoint, can anyone get me steps in how
to replace it.

I posted previously about interference on my CB from something in the van. I
found the source but I don't know what it is. The van is a Grand Voyage with
a 3.3L engine. The box in question is mounted on the firewall between the
heater fan connections and 2 relays. The connector  has ...

My 94 T&C's brake lights are staying on all the time (disconnected the
battery to save the charge). I think that it is a pressure switch under the
hood as opposed to mechanical above the brake pedal. But I can't find it.
Can anyone tell me?

i have a 94 voyager, the other day i took apart the front brakes to service
them and i noticed the anti-rattle spring broke in half. Does this affect
the braking if broken, or should i replace it, and if i need to replace it
where can i go buy this part.

Can anyone recommend a cheap source for ATF4 in the USA? Apart from being
difficult to find, the best price I see is about $7/qt. for Mopar stuff.
TIA

Automobile Magazine's Don Sherman is finally bold enough to write the
truth: Chrysler's much-vaunted new "Hemi" really isn't anything more than
marketing hype:
http://www.automobilemag.com/news/0407_hemi/

I have a 83 Chrysler lebaron Town & country and want to replace the
car radio with a similar unit (but 84 model)I found on Ebay. However
the wiring is totally different.
Car side has 3 plugs, 2 of which are weired shaped, with in total 10

A friend is thinking about getting a new 300, most likely with the 3.5
engine.  From reading magazines over the years, I know that this engine
is "nothing special."  At least is doesn't win the awards and high
praise that certain Honda and Nissan bent sixes receive.  My friend

Prior to having it painted, I removed the side mouldings from my 1990
Dodge Spirit. I am ready to put them back on. Before I can do that, I
need to remove the old adhesive material from the mouldings.
Does 3M make a product, or is there any other easy way to remove the

Test drove the 300 and the 300C this weekend. The performance of the 3.5
was quite good and the 300C is a rocket. The demonstrator 300C that I
tested was getting 14.7MPG, I'm wondering what people are really seeing
for daily and highway driving. My 94 Concorde with a 3.6 still gets ...

i have a 94 voyager 3.oL with a torn balljoint, how much would this cost me
to repair and how hard is it to fix it myself. And what if i don't repair
the broken balljoint will anything else happen.

Any one know how fast it will go????  I think 140 +.   At 70 rpm is 2200 so
it should be able to pull 4400 rpm at 140 mph.  any thoughts on this???  I
wont try it { to old } 50 years ago i would not be asking cause i would have
tried to peg  that white 160 mph speed o meter ...

Hi, and thanks for helping.
I have just purchased a 98 Grand Caravan (GC) LE loaded.  It has power
locks and a remote keyless entry system and a factory car alarm.  It
was a great deal, but I can't contact the original owner for my