| Thread | Last Post | Replies |
|
| RKE Module Location in a 1993 Voyager | 27 Jun 2004 02:52 GMT | 1 |
The manuals don't tell me where to look for the module. My van has electric door locks and I want to reprogram my remote.
|
| Low side pressure on 97 Stratus AC? | 26 Jun 2004 16:40 GMT | 2 |
Anyone have documentation on what the pressure should be? P
|
| A/C CLUTCH -96 VOYAGER NOT TURNING | 26 Jun 2004 16:24 GMT | 4 |
Hi. i have a 96 Ply grand Voyager and the a/c clutch is not turning thus no cool air in 94 degree heat((( Any ideas on what needs to be done to rectify tihs awful problem would be appreciated.
|
| NOS Vacuum lines for 1968 Charger Headlight doors. | 26 Jun 2004 06:40 GMT | 1 |
Does anyone know a source for the vacuum hoses that operate the headlight doors on a 1968 Dodge Charger? I'd be happy with repro or NOS. I'm just trying to avoid using the old, hard, oily, ones that I've found on parts cars. It seems like there has to someone who has
|
| Wobble'n Shaking at 40MPH | 26 Jun 2004 00:03 GMT | 4 |
1994 Grand Caravan, 3.3 liter. At about 40MPH, I experience a stong shaking or wobble in the Caravan. I do not feel it in the steering wheel. The tires are new and balanced. My guess is a possibile Bent Wheel or Bent Axle. But perhaps someone else has
|
| '89 Caravan Shimmy at 35 mph | 25 Jun 2004 22:27 GMT | 4 |
I have a newly acquired 1989 Grand Caravan (106,000 miles, LE with 3.0 V6 and the A610 transmission) that often shimmies at 35 mph. It starts at about 33 mph, peaks at 35, and tapers off at about 37 mph. It happens only when accelerating or to a much lesser extent when holding a ...
|
| Caravan AC Self Test Code | 25 Jun 2004 18:37 GMT | 3 |
I just ran the HVAC self test on my '97 caravan. It takes its time going through - then winds up with the rear wiper button doing a slow blink. I was under the impression that no lights would be on if all was OK. Would anyone know what this code means ?
|
| question - bolts and car computers | 25 Jun 2004 04:31 GMT | 2 |
We were in the processing of removing the bolt that holds the plug which goes into the computer...when the end it screws into came out w/ it. Now we can't get it off. The plug will go into the new computer really snug but of course it can't be bolted. Is this bad? Should I get the ...
|
| 1997 1/2 voyager 3.0L 3spd transaxle, 75000mi, just blew up the transmission. | 25 Jun 2004 03:43 GMT | 6 |
1997 1/2 voyager 3.0L 3spd auto transaxle, 75000mi, just blew up the tranny. I've owned this from brand new, and always babied the shifting, holding back on accelerator , until after the shifts are complete.
|
| Crossfire | 25 Jun 2004 01:19 GMT | 18 |
I just saw a Crossfire and it's a beautiful looking car, at least from the front. I'd be interested in hearing from Crossfire owners about how the like it?
|
| '98 Neon - Not "fixing" lifters - Bad? | 25 Jun 2004 00:31 GMT | 2 |
A few weeks back, the check engine light came on for my '98 Plymouth Neon. I took it into the shop, and mentioned that I'd noticed a "pinging" from the engine, especially when it was cold in recent weeks. I wasn't sure if that was part of the check engine light situation or
|
| 1990 Voyage - solenoid doesn't open rear gate | 25 Jun 2004 00:30 GMT | 1 |
The front dash button to open the rear gate on my 1990 Voyager no longer unlocks the gate. The solenoid is activated as I can hear it and the light on the dash flashes quickly but the lock is not disengaged. I've pulled the panel and inspected the lock mechanism and
|
| 1998 Dodge Caravan SE - Rusty Oil Pan | 24 Jun 2004 22:52 GMT | 4 |
I looked under my 1998 Dodge Caravan SE today and saw the front side of the oil pan to be very rusty, flaking pretty good and know I need to get it changed. Has this been a problem for 1998's? What an estimated cost on having it replaced?
|
| Chrysler alternator bracket | 24 Jun 2004 16:25 GMT | 6 |
I've Chrysler Voyager '90 3.0, and alternator bracket has broken. I don't know what is the part number of it, and even if I call it right:"alternator bracket". Would anyone help me and tell me the part number?
|
| Chrysler "C" Body HP Exhuast manifolds | 24 Jun 2004 12:59 GMT | 9 |
I'd like to keep the stock look of cast iron manifolds, but add a bit of performance to my 1963 413CID. What engine donors would have the HP exhaust manifolds and would be a bolt on replacement? Casting numbers would be much appreciated :)
|