| Thread | Last Post | Replies |
|
| chrysler rebates after Jan 3? | 06 Jan 2005 21:47 GMT | 13 |
Anybody know of a list of what rebates Chrysler will be offering after the Jan 3 cut off? thanks
|
| Chrysler 300C rental car in Canada? | 06 Jan 2005 21:15 GMT | 11 |
When visiting Canada as a tourist for a while, I wonder if their might be a chance to get a Chrysler 300C as a rental car during my stay. Do you know of any car rental company in Canada having the Chrysler 300C available? If so, what category will it be: Luxury, Premium?
|
| LH Steering Problem | 06 Jan 2005 18:31 GMT | 8 |
Since it has been 2 months since my last problem with my 96 Eagle Vision TSI, I should have known that I was due for a new one :-) Today when I tried to steer to the left it was very hard. I had to put both hands on the steering wheel and almost drag it to make even a small left
|
| 2005 SWB minivan seats | 06 Jan 2005 16:58 GMT | 3 |
On a short wheel base Caravan or T&C, is it possible to remove the center seat(s), and move the rear bench seat up to the middle? We did this with our '95 Voyager SE soon after we bought it. The salesman here says that we can do this with the new ones as well, but he doesn't
|
| Headlights on '95 Eagle Vision | 06 Jan 2005 03:22 GMT | 5 |
I'm hoping someone can clue me in here. I haven't been able to find anything in the manual to point me in the right direction with this. If I turn the ignition off before I turn the headlights off, when I turn the headlights off, they blink and then come back on again, so I
|
| 1997 town&country | 05 Jan 2005 20:19 GMT | 2 |
Does anybody can help with programming intructions for a replacement remote,Original remote is not working.
|
| Neons and cold weather | 04 Jan 2005 20:14 GMT | 9 |
This is a two part question; As some people may know, Ontario got hit with a flash freeze over the weekend, going from 2'C to -30'C with windshield. First question, after not driving my 95 two door Neon since Friday when it
|
| Which Engine Coolant for 1999 Chrysler T&C ? | 04 Jan 2005 18:28 GMT | 5 |
I need to add some engine coolant to 1999 T&C - the level is below minimum mark. Chrysler recommends ethylene-glycol based coolant, but they also warn not to mix brands since various other additives,
|
| Rare Chrysler published Books | 04 Jan 2005 09:39 GMT | 1 |
I just wanted to let you know that the two books published by Chrysler Corp in 1946 and 1947 about the production of tanks and bombers at the Detroit Plant.
|
| 91 Acclaim column shift indcator | 03 Jan 2005 21:49 GMT | 2 |
I just changed my transmission cable linkage and now my 91 Acclaim column shift indicator does not move. (The little thing that says you in PRD123.) This job required dropping the steering column and removing a lot of the dash. I must have broke something????
|
| cooling system | 03 Jan 2005 18:46 GMT | 2 |
BASIC Troubleshooting My 1997 LHS doesn't seem to be putting out the heat that it should on these cold winter days (just below freezing). I notice that the temp gage reads much closer to the "C" end of the range than to mid-range
|
| Oil Gelation (Sludge) How Do You Get Rid of It? | 03 Jan 2005 17:01 GMT | 4 |
Just picked up a 98 RAV4 4WD 4door and the first thing I did was get the oil and filter changed (Mobil 1 5W-30). After a few hundred miles the oil looked dark (a good sign), but I ran my finger into the oil fill and there was still some oil Gel. How does Toyota recommend one get ...
|
| Chrysler group set to kill off its Dodge Stratus and Chrysler Sebring coupes | 03 Jan 2005 16:22 GMT | 27 |
http://www.autoweek.com/news.cms?newsId=101450 Chrysler group set to kill off its Dodge Stratus and Chrysler Sebring coupes MARY CONNELLY | Automotive News
|
| 96 T&C problem | 03 Jan 2005 16:14 GMT | 7 |
Looking for a little advice. 1996 T&C 3.8L, 150K miles. I've been noticing a vibration while accelerating that seems to go away once the speed is constant. When the car is at a stop, the engine revs freely.
|
| 2.2 aries 1989 | 03 Jan 2005 00:50 GMT | 5 |
I just put in a new oil pan gasket on a 1989 2.2 aries, because something around the front of the engine was throwing oil. I just assumed it to be the pan gasket, becauese the guy that just put the engine back together after replacing a piston, died and I acquired the
|