Hello, All!
I want to put a second radio in my '94 Voyager with IR remote control and
mp3, and I think the best place is where the cd-changer should be, or under
a seat.

While cruising between 65 and 70 on the throughway this evening, my
speedometer suddenly (and I do mean suddenly) dropped to zero. I felt a
slight shift or hesitation and began looking at gages, suspecting the worst;
nothing but the speedometer registered unusual and the car ...

Can someone tell me why the MoPar boys just don't get it?
In the 80's they stuck the proud names of Charger and Challenger
on the front drive four banger Mitsibishi import otherwise known
as the Omni.

The local dealer, Tuttle-Click in Tustin CA wants $535.00 to do this
job on my '97 Grand Caravan 3.8 (Nippondenso starter). Does this amount
look right? ..opinions?

I have a little problem with my 2001 Concorde which currently has 48,000
miles. There seems to be an odd high pitched creaking noise near the inside
of the left front wheel, and I can't figure out what's been causing it.
This noise occurs only when starting the vehicle in cool ...

Sometime back, a poster described his experience when changing the fuel
pump on his '88 Chrysler mini-van.
He mentioned that the fuel pump and inlet screen were coated with a
thick gooey substance, which I am guessing was varnish.

I am going to replace the the tailgate of our 96 t&c (dent, rust and rust
out on bottom) with a salvage yard one.  The guy from the salvage yard
says that it would be another $95 to have my glass put in.  Can I do that
myself?  Is it only a bracket holding the glass in?

I have a 1990 LeBaron Convertable, 3.0L V6, 4 speed auto.
None of the running lights work, nor do the cornering lamps.
The turn signals, brake lights and headlights all work.
When I install a fuse (20A) for the break lights then turn

I've noticed when I drive at highway speeds the power steering pump around
the dip stick is wet with fluid.  Does anyone know what might be causing
this ?
thanks,

Does anyone know how to get to plugs 3 & 5, on a 3.3L, which are in the
back?
Please help
John

THey claim that a K&N filter would improve fuel economy. What I would like
to ask the community is if K&N increases air flow, shouldn't the computer
adjust to put more fuel to make the mixture right?. So maybe you get more
power but how can it get better fuel economy. Anybody ...

http://www.are-u-sure.blogspot.com <- - - all bloggers go here

Some time ago I was driving with my rear seats down and I heard a steady
tone that appears to be coming from the rear of the car.  Now I hear
that tone in the background with the seats up.   It's a constant pitch
regardless of engine/vehicle speed, and only fluctuates slightly if

I am re-building a Mitsubishi 2.6 L engine (Caravan 84). After
installing the main bearings and finding all appeared well – the crank
turned without effort, I started to install rod bearings, trying #1
and #3 pistons. The rotational resistance torque increased by over 100

I researched the source of a 500 Hz vibration at idle, mostly in the
cab and I think I've located it as being the exhaust resonator
touching the frame.
The questions are: