| Thread | Last Post | Replies |
|
| Labor costs in the US auto industry | 28 Feb 2006 22:54 GMT | 1 |
I heard Gov. Jennifer Granholm of Michigan being interviewed on the radio this morning. She referred to an engine plant in Dundee, set up jointly by D-C, Mitsubishi and Hyundai, where labor costs are only 3%. This is a unionized (UAW) plant.
|
| i need advice | 28 Feb 2006 21:29 GMT | 8 |
I know this is not the right place to ask for advice,but anyone who can I would appreciate it.Here is the problem,October 25 2004,my husband and I traded in my truck to a dealership.They then sold it to another dealership in south Texas.Well on January 20 2006, I recieved aletter
|
| 96 LHS cooling problem | 28 Feb 2006 11:30 GMT | 1 |
My 96 LHS ran hot the other day. Symptoms were: Wife said she smelled antifreeze inside the car. Saw no evidence of a heater core leak. Popped the coolant tank cap and it blew coolant out pretty hard. Left it running and put in some water until it calmed down a bit although ...
|
| Wheel Advise | 28 Feb 2006 09:10 GMT | 4 |
One of my OEM alloy wheels on my 01 PT Cruiser has an inside dent. It is enough to give a measurable runout on the inside of the tire tread. Is it ever OK to take a whack at the rim with a sledge hammer to work out the bend or is this always a death sentence for the wheel? (I know ...
|
| Transmission, Voyager -95 | 28 Feb 2006 09:05 GMT | 1 |
I have a -95 Chrysler Voyager (Caravan) AWD with 149000 miles on it. Posted here some months ago about my transmission problems, still looking for advice. Have the following problem:
|
| Where's cylinder #3? (3.5L) | 28 Feb 2006 08:31 GMT | 7 |
Anyone know which cylinder is #3 on my 97 3.5l Concorde? According to my Chilton's it is 56 34
|
| could there be electrical short? | 28 Feb 2006 07:42 GMT | 3 |
heater blower dont work, I cannot find the resistor on the fire wall or a relay switch, i changed fuses and checked them all, seems like half work and thats it
|
| Shock therapy for Chrysler Town and Country | 27 Feb 2006 22:45 GMT | 1 |
My 2002 Chrysler town and Country van suddenly refused to let me turn the key to start it up. I tried all the conventional tricks like moving the steering wheel a bit. Nothing! In desperation I gave the car a hot shot from my brother in laws car.
|
| 2003 Voyager Passenger Side Floor Wet | 27 Feb 2006 22:42 GMT | 1 |
The passenger-side carpet is wet underneath the floor mat on a 2003 voyager I recently purchased. We are in South Florida with the A/C running when we drive so I am assuming it is the drain on the A/C. Any ideas on how to fix this?
|
| Solved!!! Crysler voyager -95 3.3l Backfiring in aircleaner ,New info!! | 27 Feb 2006 21:45 GMT | 1 |
My Voyager is backfiring in the aircleaner at 3700-4000 rpm when i drive it and if the gearbox is in park and i rev it up to the above rpm. It starts to missfire slightly and if i press the gas even more it will backfire so much that i even blown a aircleaner top off. This
|
| chinacarforums | 27 Feb 2006 18:33 GMT | 2 |
we can discuss things on the forums about china cars www.chinacarforums.com
|
| Hornet pics. | 27 Feb 2006 15:06 GMT | 2 |
What..is...it? And why does Chrysler make such ugly boxy cars with such garrish and squarish grills? The Caliber is such an ugly chunky thing.. heres the Hornets pics a la BBCs Top Gear:
|
| 96 Grand Caravan strut tower rot | 26 Feb 2006 20:06 GMT | 2 |
Has anyone else had their top front strut body mountings rust out? tnx Glenn
|
| SRT8 | 26 Feb 2006 12:23 GMT | 1 |
Will Chrysler sill make the SRT8 available for 2007? Ken
 Signature "Now Phoebe Snow direct can go
|
| Are your headlight lenses getting cloudy? | 26 Feb 2006 01:06 GMT | 167 |
Ever notice all the older Neons, minivans, Intrepids and some Fords on the road suffering from opaque lenses? I even spotted an older Mercedes developing the problem. It is unacceptable that we have to constantly buff or replace cloudy, yellow polycarbonate plastic headlight ...
|