i am needing to replace my quater panel windows how do i do it
mandy

My wife brought her 99 voyager in to mechanic and he told her it
needed new swaybar links.  I stopped by and told him he did them in
December of 05.  16mos ago.  He said one was bent and the other one
was gone.

Greetings all. Besides having a 300M, I also purchased a 2007 TL and
even thoug it's a different car, I'm sure some of you can still
assist.
I have a 2007 Acura TL Type S and want to replace those stock wheels

I need to replace the front brake pads on this vehicle.
I would like to know where is the best and safest place to position
the jack stands. There is a place on the *frame rail* behind where the
lower control arm is attached. Moving a little further back, some

A friend of mine recently bought a 1996 Chrysler Town and Country with
the 3.8L engine.
The van has around 200,000 miles on it - really up there.
Maintenance looks to be at least average if not better.

Where is the EGR valve and is there a good place online to buy?  I have the
3.8L and it idles rough when it is in D.  Changed the plugs and wires,
helped overall performance, but still rough idle.  Thanks
Yappy

I'd like to replace the serpentine belt on my 2000 300M.
Any special tools required ?
Kind of tight in there between the radiator and the front of the
engine.

Hi group,
I was hoping someone could me help me with this problem.
I drive a 1989 Chrysler New Yorker that's in really, really good
condition physical and mechnical condition for a car this old.  I'm

Archive-name: autos/chrysler-faq/general/part1
Posting-Frequency: 15 days
Last-modified: 2006/6/1
Version: 5.9

Hi group,
I was hoping someone could me help me with this problem.
I drive a 1989 Chrysler New Yorker that's in really, really good
condition physical and mechnical condition for a car this old.  I'm

To make a long story short,
My 1995 Chrysler Cirrus won't start after one or more stops when
running errands.  After turning the vehicle off, it sometimes has
troubles starting back up again.  This often results in a few minutes

I just bought a used 2003 Concorde limited after my 99 Intrepid lost
its front end to a cab.  Although still greaving over the loss of my
intrepid, the Concorde is great.  The Concorde driver seat is a 8 way
power seat.  But the passanger seat seems to be a 6 way power seat. It

Driving down the road tried changing down a gear and it wont let me so
pulled hard on the gear stick it went in gear and then i heard a
clunck in the engine bay then my pedal has no resistance?
does this sound like a clutch, or the cable?

I am looking for evryone's opinion!
I have a choice of getting a 2008 Dodge Avenger R/T with a sunroof OR
a 2006 Dodge Charger R/T Daytona (with 25000 miles) for the same cost.
The Avenger is new, has great gadgets and reasonable performance. But

I have a 99 Intrepid with the 3.2L engine, about 60k miles.  My local
dealer is offering a throttle body service special ($79)  that includes:
Clean the throttle body
Inspect throttle plate