| Thread | Last Post | Replies |
|
| Hand controls for a 2CV? | 25 Apr 2009 19:25 GMT | 1 |
A friend just bought a sweet 2CV of 70's vintage and was wondering if there were haand controls availible for this model. If anyone could send me a link, or forward info regarding such a device, it would be most appreciated. Thank you in advance.
|
| Funny noise from C3 dash | 17 Apr 2009 11:35 GMT | 2 |
I have an 04 Citroen C3 XS. Recently, a clicking noise has started coming from the dash when the engine starts. Its seems to be around where the heating/aircon controls are. It sounds like a plasticy noise as appose to metal etc. The noise happens twice. It will not happen ...
|
| problem with some citroen c3s | 10 Apr 2009 20:14 GMT | 1 |
heres one for any of you c3 owners,some early citroens c3s had loose fitting washer jets,as they fix in directly into two square holes in the bonnet, but they were not a snug fit, therefore when it rained or you use the washer,water runs down the gap
|
| speedo problem | 02 Apr 2009 11:57 GMT | 7 |
Hi all,this is steve living in sunny spain.A friend of mine has a 1999 citroen synergie and is having speedo problems.its been back to the dealer he bought it from numerous times to fix to no avail.The speedo reads very erratic and runs fast and the needle sticks when turned off ...
|
| xsara 1.4 cutting out | 02 Apr 2009 08:39 GMT | 1 |
car keeps cutting out on low revs, if am driving and go to change gear the revs drop and cuts out, it wont idle either.. read loads about idle stepper motor, map sensor and fuel relays but does anyone no 100% what the cause is as it does seem to be a big problem with these
|
| Timing belt renewal | 01 Apr 2009 12:54 GMT | 3 |
Hi, wonder of any of you knowledgable ppl can tell me how hard or easy it is to replace the timing belt on a citroen xsara picasso 2.0 hdi diesel. 04 plate? I was a competent mechanic (retired now) and am fed up with the rip-off prices charged today, so have decided to reaquaint ...
|