Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / August 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Cost of Brake Job31 Aug 2004 07:02 GMT7
Need some brake work.  This is quote I got from dealer.
Dodge 1500 Ram QC,  23,600 miles.
Front, replace brakes, turn rotors   $194
Rear, replace brakes  $159
towing question31 Aug 2004 06:15 GMT24
I have to move two of my trucks to another location about 500 miles
away. I was thinking of pulling the F150 Sport backwards behind the
Dodge One Ton by making some sort of hitch that would lift the back
wheels off the ground.
Durango wheel center caps31 Aug 2004 04:00 GMT10
I just purchased a 2003 Durango and the center caps have fallen off of
both the front wheels.  I bought a new one off ebay after the first
fell off, but now the other one is gone too.  Is this a common problem
or a sign of some problem?
Coolant temp outta control after using radiator stop-leak31 Aug 2004 03:45 GMT7
In the same 1999 Ram Van with the 360 engine, after I replaced some
really filthy coolant, and then put in 2 containers of Gunk brand
stop-leak (which seems to have worked), I found the temperature suddenly
going sky-high shortly after starting up. (yes, I put the bottom hose
A-Pillar "grab" / assist handles -- crappy a.s design30 Aug 2004 19:43 GMT18
As I mentioned previously, I purchased a 2004 Dodge Ram 1500 Quad Cab 4x4
less than a month ago... Had an interesting experience today as I was
getting in the truck... I grabbed the "assist" handle on the "A" pillar to
pull myself up and it ripped out of its attachments... I got to ...
1988 D100 318 throttle body30 Aug 2004 18:44 GMT1
ok guys, I'm new at this and I've never worked on a trottle body FI
before.
I bought this truck (1988, D100, 318) in the hopes of swapping out the
intake and 2bbl carb with a 600 cfm 4bbl along with a cam and headers.
2000 dodge dakota transmission question30 Aug 2004 06:48 GMT4
I have a 2000 dodge dakota, and a transmission question about it.  Most of
the time the (automatic) transmission shifts smoothly, but occasionally,
and only when shifting into reverse, the transmission makes a clunking
noise, and more ominously (and more rarely) a squeak / chirp -- ...
2004 RAM 1500 Quad cab w/Hemi30 Aug 2004 00:43 GMT3
Does anybody have this problem -
I hear a tick from the motor - like an exhaust tick continuously when it's
running idle. Took it to the dealer - but they claim there is nothing wrong
with it though they do hear the tick. They claim it's normal. I'm concerned
Water Leak - AC?29 Aug 2004 03:45 GMT8
Over the last week I have been getting a lot of water appearing on my passenger
side floor of my 2003 Dodge Dakota.  It's that bad that I can scoop out a
handful of water.  I don't know where it is coming from, but I suspect that
maybe the AC condensor drain is clogged, since the ...
An Election Message that we can all probably agree on28 Aug 2004 22:57 GMT10
didn't write this but it is a good point.
>IT DOESN'T  MATTER IF YOU ARE REPUBLICAN OR  DEMOCRAT!
>
>KEEP  IT GOING!!!!
engine swap /6 to 318 is it worth it28 Aug 2004 18:58 GMT14
i own a 79 dodge custom 100 with a /6 and i want to rebuild the entire
truck for the fram up. but I don't know what engine to use, should I
rebuild the old /6 or upgrade to 318.
What am i getting my self in to!!!!
OT Presidential Candidate28 Aug 2004 13:56 GMT25
I am John Kerry.
I was against the first Iraq war, I am against the second Iraq war, but I voted
for it.  Now I'm against it but I was for it.  I support the UN. I'm against
terrorism and against the Iraq war.  But I voted for the Iraq war.  So, I voted
sigh, ball joints28 Aug 2004 06:46 GMT1
with 22,000 on the Dakota, and a service appointment for this Thursday.....
does anyone have any knowledge of being refused the replacment on left and
right uppers. ?
pass. side  has been popping, and when I got new tires saturday, sure
1994 Dodge Ram 1500 4X4 5.928 Aug 2004 04:15 GMT3
The above truck has 142000 miles and until yesterday ran perfect. But it
left me on the side of the highway today, acted just like you sh.t the key
off. Motor will turn over but will not start. Plugs are firing and fuel rail
check valve has gas. Any help would be greatly appreciated ...
Clicking and Popping: Catlytics from hell27 Aug 2004 23:15 GMT3
All of a sudden I am hearing loud clicking and popping from underneath
my 04 RAM Hemi 4x4.  Its coming from the catalytic converter area and
toward the engine.  Sound exactly like what you would expect from a
catalytic converter clicking as it cools off, but louder and constant.
Pages: 1 2 3 4 5 6 7 8 9 10 July, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.