| Thread | Last Post | Replies |
|
| 01 Dakota R/T abnormal roar at highway speed. | 01 Oct 2004 00:48 GMT | 1 |
I have a 2001 Dakota R/T CC. It has 29k miles on it and about 3k miles ago start to have an abnormal grown and vibration through the gas pedal and a little through the steering wheel which have all become worse over time. The noise is identical to the noise you experience when ...
|
| 2003 Dakota | 30 Sep 2004 17:53 GMT | 2 |
I have a 003 Dakota 6 cyl. 2 door automatic. Dan truck only gets 14 mls. ta a gallon. I thought it might get better then this. Anybody else have the same problem with this years dodge? Any suggestions? Christopher
|
| Ping: FMB | 30 Sep 2004 15:12 GMT | 21 |
Ok, now I know what your Delta looks like! Check out this guys shop and his cabinet work... http://www.e-woodshop.net/ Mac
|
| 2003 Dodge Ram 1500 Quad Cab 6ft box 98L Gas Tank VAPOUR question. | 30 Sep 2004 02:10 GMT | 2 |
My friend who owns this truck says that it doesn't hold 98L total gas from the pump because the tank has to allow %15 for vapour. I mentioned something about my car being filled right up to the NECK and over flowing and how I don't see a 15% difference because mine doesn't allow
|
| Dodge SRT 10 truck | 30 Sep 2004 00:58 GMT | 101 |
I am thinking about buying the SRT 10. My problem is I have spent 5 years working on building my 96 C1500 ext cab chevy truck. I am at the point where all I need to do is finish the motor. All it needs is a whipple super charger. But now I am thinking about the SRT 10 since it ...
|
| best spray in bedliner for a 1999 Dodge ram? | 29 Sep 2004 23:55 GMT | 10 |
|
| Engine light | 29 Sep 2004 17:20 GMT | 14 |
I have a 2003 1500 Ram with the 4.7 engine. This morning when I started up, the engine icon on the left upper side of the dash was lit. I have seen many posts about this but I forgot what they were and was wondering what steps I could take before taking it into the dealer. It ...
|
| Prodigy Brake Controller | 29 Sep 2004 14:58 GMT | 6 |
For all those that provided advice/discussion/comments, thanx. It was all very helpfull. Based on information gleaned here and on other boards, I purchased a Prodigy controller, and installed it in my '01 Dakota tonight. It's a
|
| Persistent misspelling of Cummins | 29 Sep 2004 14:53 GMT | 9 |
Over a period of time there have been frequent misspellings of the word Cummins (Cummings) in posts and protests from the insulted. A few days ago I noticed a similar misspelling in the marketplace. I was in a Tractor Supply store looking for a can of spray paint. On the shelf ...
|
| Looking for interior parts | 28 Sep 2004 21:48 GMT | 2 |
99 Ram 2500 4x4- Customer needs lower seat cushion cover and fabric (left) inner door panel. @ dealers said they are backordered;
|
| Amsoil the Good and the Bad (continued from Mobil1 vs. Valvoline) | 28 Sep 2004 19:26 GMT | 16 |
I started this thread to free the old thread and hopefully stay on topic here. As I mentioned in my last post I was going to do some research and see what horror stories I could find. So far I have seen some problems in the snowmobile threads regarding some 2 cycle challenges. I ...
|
| 92 Caravan 3.0 V-6 | 28 Sep 2004 03:12 GMT | 2 |
Here is an easy one for ya'll. When removing the harmonic balancer should I turn the big nut counter clockwise or clockwise. Timing belt troubles.
|
| Motor swap question | 27 Sep 2004 22:18 GMT | 2 |
I have a 73 dodge 1-ton, with a 360 in it and I would like to swap the 360 with a 440. I can't seem to find a hogs head for the swap, are they that hard of an item to find or can i substitute in one way or another?
|
| Towing off the bumper??? | 27 Sep 2004 21:33 GMT | 6 |
Does anybody have any experience towing off the bumper of a Ram 1500 I have an 03 2WD Quad Cab and have heard differing opinions. One is you can tow up to I think it is 6000 #'s off the bumper but then the dealer told me I couldn't tow anything with brakes off the bumper. But who ...
|
| Trailer Brake Controller | 27 Sep 2004 21:17 GMT | 22 |
I just purchased a flatbed trailer. Dual axle, brakes on one only. Now I need a good brake controller. I want digital, not inertia. I want quality without a lot of extra doo-dads. I have the factory tow package, and I still have the controller pig tail from Dodge.
|