| Thread | Last Post | Replies |
|
| OT: woodworking group(s) | 20 Sep 2004 15:45 GMT | 26 |
Any woodworkers in the group have any news groups they like or rec commend?? Power or hand tools, turning, plans, etc.... thanks,
|
| trade my dodge 20's for 17's | 20 Sep 2004 15:40 GMT | 13 |
hi. i am wanting to trade out my 20's with 26000 miles on them, for the stock 17's. the tires must have less then 5000 miles on them, and i am wanting eithier the aluminum or the 4x4 off road wheels. not the factory chrome. email if interested
|
| 56 Dodge Ram | 20 Sep 2004 13:21 GMT | 2 |
Acquired a 1956 Dodge 1/2 ton which is in fair shape and I intend to restore. Anyone out there had a similar experience or can recommend supporting web sites? Thanks!
|
| Radiator drain??? | 19 Sep 2004 19:00 GMT | 2 |
On a 2000 Dakota with 3.7 V6 engine, where would I find the radiator drain petcock? TIA
|
| HOW MANY EVAPORATORS BAD 2001 RAMS? | 18 Sep 2004 13:47 GMT | 3 |
How many people out there had early failure air conditioner evaporators leaks? My 2001 318 ram 1500 2wd with 80k leaks already. Calling shops including the dodge dealers they say they had a lot of leaking ones. Why
|
| Is the local WalMart tire/auto store jerking me around? | 18 Sep 2004 03:57 GMT | 46 |
Here's a little story: I got replacement tires for a 99 Dakota from a Walmart. Real good price on the tires, and I bought a lifetime spin balance/rotation option at the time of purchase. So, every second or third oil change, 6k to 9k miles, I have done at Walmart and get the
|
| Thermometer check on RAM2500? | 18 Sep 2004 03:49 GMT | 4 |
Thanks to all whove tried to help out on my antifreeze/overheat issue. The truck will be at the shop on Monday since I'm at a loss... In the meantime, can someone tell me where the thermometer is located, and how one would check it for leaks/problems? Its mostly just curiosity, ...
|
| 1997 dakota starting problem | 18 Sep 2004 00:39 GMT | 24 |
My 1997 dodge recently(couple of months ago) started to take longer to start, that is you would have to wind it over longer . When it would start it would run rough at about 300 rpms and then surge to 1500 then back to 4 or 5 hundred. After doing this for about 30 seconds it would
|
| Codes...Emmissions Control | 17 Sep 2004 19:16 GMT | 2 |
I have two codes in memory and an engine light on: p0455....large leak evap. sys.----What might this one be? p0442....small leak evap. sys.----I assume this is the gas cap, although it has been there for several weeks and several removal and replacing gas
|
| 97 RAM faded front bumper question | 17 Sep 2004 18:42 GMT | 8 |
Hi, I've got a '97 RAM 1500, and the top part of the front bumper is supposed to be black, but it is so faded that it looks like it's grey now. I know that all of these trucks have the same issue, so there must be something that can bring the color back. What are people using to ...
|
| 2003 Ram 1500 front brake problem | 17 Sep 2004 17:51 GMT | 10 |
anyone having any problem with the front brakes on their 2003 ram 1500 front brakes. there is an tsb out on it. Frank
|
| 02 Ram truck MIL | 17 Sep 2004 16:43 GMT | 1 |
My 02 Ram's MIL light came on, but the truck seems to be running fine. Turning the ignition key on and off 3x gave me the error code "P 1491" (which from previous postings means that the AC Condensor Relay is blown). I replaced it with a factory relay, yet still the light
|
| buy my new dehydrated water | 17 Sep 2004 15:24 GMT | 30 |
go to www.buydehydratedwater.com be sure to check out the FAQ
|
| Semi-OT- Yes Virginia, there is a bigger truck than a Ram 3500 | 17 Sep 2004 15:14 GMT | 2 |
Check it out, boys and girls <VBG> http://www.internationaldelivers.com/site_layout/severe/cxt.asp Budd
|
| Help with alignment and suspension on 1977 D100 | 17 Sep 2004 14:22 GMT | 3 |
I have a '77 D100 and I am in the process of fixing it up for my son to drive. When I was putting brakes on the front I noticed that the upper control arm was bad (had holes in it, we live in the NE). I got a pair of control arms from a salvage yard in NC. I have installed
|