Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Dodge / Dodge Trucks / September 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Lift Kit questions09 Sep 2004 02:42 GMT1
I am considering purchasing this lift kit for my 1980 RamCharger.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7919593622&ca
tegory=33585

It includes:
4" Front Luxury Ride Leaf Springs
An election issue that we call probably agree on 09 Sep 2004 00:07 GMT90
I didn't write this but it is a good point.
>IT DOESN'T  MATTER IF YOU ARE REPUBLICAN OR  DEMOCRAT!
>
>KEEP  IT GOING!!!!
Dodge Dakoda won't start under any conditions.08 Sep 2004 22:44 GMT4
Hello. I am new on to this site, but hope someone can help me.
(I have a 1997 Dodge Dakoda Sport that won't start on it's own. At work,
is when it first gave me problems, and so I would have someone jump start
me and the engine would start just fine. For a couple of days, I ...
OT- respect.08 Sep 2004 12:59 GMT2
I was recently told I had to respect someone before I could expect to be
respected. Apparently, that person doesn't understand respect. You can't
demand it, you can't buy it and you can't force it.
A gang member shoves a Uzi in your face and yells, "Quit dissin' me, man!!!"
OT: 97 jeep running real rich, dies, gas in oil07 Sep 2004 23:03 GMT64
Friend of mine is broke and I've offered (yeah yeah, I'm a sucker) to
help him fix his transportation - a 97 jeep wrangler, 2.2L/5 speed.  It
has about 80k miles and recently had been down for a few months due to a
spontanious transmission failure...
Letter Of Apology07 Sep 2004 22:59 GMT21
http://www.catsprn.com/letter_of_apology.htm
Dave
Warranty and oil change interval07 Sep 2004 22:46 GMT9
My 03 Ram 1500 says either 3000 or 7500 miles between oil changes.
However, the warranty book basically is written in such a way as to
negate the 7500 mile interval.
I use only synthetic, 5W30 as recommended and can't imagine a need to
Dakota - Heavy Duty Roof Rack Recommendations?07 Sep 2004 21:59 GMT2
Just finalized the deal on a 2001 Dakota Sport Club Cab - Short Box - only
30,000KM put on it.
I'm in the Overhead Door business & I'm going to need to put a set of racks
on the truck.  Have been considering building them myself, however the
1997 Ram High Beam Problem07 Sep 2004 21:56 GMT15
Need help with my 97 ram 1500.  The high beams stay on and don't turn off
even if the truck is off . Had to remove my fuse to turn off the lights
Thanks :)
'94 Ram 2500 loss of power07 Sep 2004 20:45 GMT1
Here goes,
1st big mistake. Took a good running truck into the dealer for the
recall ignition wire replacement and the throttle cabe w/linkage.
They f.cked up the linkage, fell off just as I was going Into my drive way
steering wheel issue07 Sep 2004 15:40 GMT3
It's a 98 3500 24v ram and as mentioned in another thread, the horn is
very difficult to operate. That's not the issue for me as I rarely use
it anyway. When traveling, I'm most comfortable with my hands @ the
4-5oclock and the 7-8oclock positions. The problem is the 4 spoke
98 quad cab starting problem.07 Sep 2004 04:29 GMT2
We have a 98 Ram quad cab 2wd 360 that will not start on a cold start up..
it turns it
over with no problem....shut switch off & try again it takes right off..it
will miss for about
85 dodge ram 150 clutch problem07 Sep 2004 04:21 GMT1
i recently bought an 85 ram 150 manual transmission from a friend of mine.
the clutch pedal has no rod or linkage coming from it through the
firewall. what is involved in fixing this problem? can i buy everything as
an assembly? i have no idea what parts i need. any advice would be ...
powder coating question07 Sep 2004 00:17 GMT6
A while ago someone here posted about buying a poweder coating kit
form Harbor Freight.  There was a commercial fridge converted to an
oven involved in it, which is a little overboard for me.  My question
is about using our regular oven - would it leave anything behind that
OT- but something to ponder06 Sep 2004 17:29 GMT26
Sent to me by my sis-in-law:
I thought this was interesting......and that I would pass it on. I don't
know anything about the Koran but if this is true then it gives you
something to ponder...........
Pages: 1 2 3 4 5 6 7 8 August, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.