| Thread | Last Post | Replies |
|
| 1999 Dodge Ram Bucks | 21 Feb 2005 05:31 GMT | 5 |
Today while driving at around 45 mph the Ram began to buck (8 cyl ,gas ,auto 4x4, 43000 miles), then the check engine light came on so I pulled over . When I restarted an hour later she ran fine. It was raining when it first happened. Any ideas ? I did spray the ignition wires ...
|
| Shifter won't move. | 21 Feb 2005 03:31 GMT | 4 |
I have an 04 Dodge 1500 Hemi with auto transmission. After putting the key in the ignition ,I depress the brake pedal in order to shift from park to drive. My truck won't allow me to shift no matter how many times I depress and hold
|
| Dodge GPS navigation DVD CD | 21 Feb 2005 02:10 GMT | 9 |
Thinking about installing this system in my Durango. Looking for some input on the system, is it accuate, and any other kind of pro's and con's.
|
| I believe I was ripped off. | 21 Feb 2005 01:04 GMT | 1 |
Or was I? My 1999 Dodge Ram 4X4 had, I think, what they call a cat-back muffler system, it sounded tough and had "dual exhaust." Money is tight right now in the old household so I figured, seeing how
|
| Ram 1500 engine replacement | 20 Feb 2005 17:04 GMT | 1 |
So they are supposed to be replacing the engine in my 2003 Ram quad cab this coming week. Anyone have knowledge of whether they will reuse the old plugs, wires, belts from the existing engine or will these be new as well?
|
| 318 chuggs in gear | 20 Feb 2005 13:34 GMT | 12 |
i have a 1985 dodge ramcharger prospect that runs like s#!t. i have cleaned the carb, disconnected the exhaust changed all the plugs and wires cap and rotor, did an oil change. when it sits and idles it runs good and i push the gas and no loss of power. the problem is when i put it ...
|
| RESTORE WORKS. | 19 Feb 2005 14:42 GMT | 9 |
I ADDED A CAN OF THE RESTORE FOR 6 CYL ENGINES TO MY 95 DAKOTA, AND IT HAS STOPPED SMOKING ON START UP AND IS RUNNING SMOOTHER. THANKS GUYS. JOHN
|
| Valve stem leak | 19 Feb 2005 07:29 GMT | 10 |
My '97 Cummins pickup has had repeated air leaks at the valve stem on the driver's side front. I've wasted over half a day in 1-hour increments at the tire shop for repeated "free" flat repairs - with a new stem installed each time.
|
| Installing XM micro antenna on 04 Dodge 1500? | 18 Feb 2005 23:19 GMT | 1 |
I just bought an XM radio (roady2) with the small magnetic antenna . I would like to find a way to put the wire from the antenna inside without just sticking it through the sliding rear window of the truck. In other words I want to neaten up my install. I haven't taken the third ...
|
| Replace engine | 18 Feb 2005 20:51 GMT | 2 |
I have a 2003 1500 Ram quad cab. Have been told by the dealer that Chrysler has authorized the replacement of my engine due to a continuing vibration. Now this all seems good...so is there anything I should be overly
|
| OT Trailer for sale. | 18 Feb 2005 16:30 GMT | 2 |
Selling a new or slightly used ski mobile trailer. It is the type that is covered, hinges in the front and will hold 2 machines. It will tilt to load. It has a spare tire and wheel, bearing buddies are installed. Has been towed maybe 100 miles. I used it for storage of the atv's.
|
| clutch ? for 95 Dakota V8 4WD | 18 Feb 2005 08:11 GMT | 1 |
Hi Group, Truck: 95 Dakota, 5 speed manual, 4WD, V8 with 81,000 miles Symptoms: clutch pedal felt same as usual, but would not disengage tranny. Could start in gear and move truck - drove home in 1st gear
|
| REDUCED: '01 cummins 4x4 quad cab | 18 Feb 2005 03:50 GMT | 12 |
the new jeep i ordered is coming soon and i would really like to sell this truck instead of trading it in. see http://utilityoffroad.com/dodge for pictures and details. $19,400 truck is in awesome condition.
|
| '00 Durango wwasher problem, help | 18 Feb 2005 02:40 GMT | 3 |
Occasionally my washer doesn't work. I can't relate it to any condition such as cold, hot, been setting, been running, etc. Any ideas where to look? I would say it's like an electrical circuit breakdown and with as much as I've beat on the ww lever, it doesn't seem to be there.
|
| problems starting my 1984 dodge truck .. | 17 Feb 2005 16:34 GMT | 3 |
Hi,can any one help? I have a 1984 dodge ram pu it wont start,i put new wires,newplugs,new dist.cap,new coil,new feul pump,and i still cant get any feul to my carb....
|