| Thread | Last Post | Replies |
|
| Cruise control surges | 31 Mar 2005 23:53 GMT | 3 |
Every time I press switch on cruise control (i.e., press Set button) the truck would accelerate 5-10mph. Is this normal? It's annoying as hell, and other vehicles I've driven don't do this. Can this behaviour be changed? Dodge Durango 99, 5.9L
|
| Loose steering | 31 Mar 2005 21:42 GMT | 1 |
Durango 99 steering feels too loose, with insufficient feedback. Vehicle does not pull to left/right when driving, and I've just had tires & upper ball joints replaced, and wheels aligned. I suppose the looseness in steering is at least partially due to high tire profile ...
|
| I don't believe it!!! | 31 Mar 2005 17:23 GMT | 29 |
More friggin' snow!! Supposed to get about a foot of wet heavy snow overnight ending Thurs. afternoon. I started the lawnmower last weekend. Now it seems like I'm in Buffalo. Okay, I'm done.
|
| gas gauge problems, Ram 1500 | 31 Mar 2005 08:40 GMT | 4 |
Aside from how fast it drops... My gas gauge, after I fill the 25 gallon tank, stays above F for about 120 miles. Then in the next 280 miles the gauge drops like a lead balloon. Why the heck can't Dodge make a reliable gauge?
|
| Cat Back Exhaust | 31 Mar 2005 06:40 GMT | 3 |
Has anyone put on a cat back after market system and noticed a power improvement. I know they tell you get more horsepower but is it worth the $$. I'd like to have a beefier sound than stock also. Any recommendations?
|
| Dumb Question | 30 Mar 2005 21:42 GMT | 1 |
OK, I know the rotation of the dist., and the firing order. But, is number one cylinder on the right or left (looking at the engine), and does it go 1-3-5. 2-4-6? It's a 93 Dakota, 3.9L.
|
| Better springs for RAM | 30 Mar 2005 16:27 GMT | 2 |
I haul a 24' fifth wheel camper with my 1999 Ram 1500. It sags quite a bit when hooked up, but the truck is okay to haul that size camper and weight. I've been looking into buying Supersprings to get rid of that sag.
|
| 02 Cummins Lift Pump | 29 Mar 2005 17:47 GMT | 18 |
Hey, Folks. I have a 2002 Ram 2500 with the Cummins TD (regular output, not the high output) and I've got a problem; low lift pump pressure. I have checked the fuel pressure on the low side of the injector pump and it shows 5 PSI at idle, and jumps to zero on throttle
|
| installing brakes on ABS vehicles? | 29 Mar 2005 14:00 GMT | 3 |
tip: when you push the piston back on the front calipers and the cylinders back on the drums - open the bleeders and block off the hoses (clamp them lightly) to avoid
|
| OT took delivery, '05 rubicon | 29 Mar 2005 10:44 GMT | 13 |
my factory ordered rubicon has finally arrived. looks real good parked beside the big dodge (same color). :-) http://7slotgrille.com/jeepers/tj/nathan/index.html
|
| Stalling after airbag replacement | 29 Mar 2005 08:05 GMT | 2 |
Durango 99, replaced airbags and engine stalled immediately after starting. Little bit of gas would keep it running, tho. Check Engine did not light. After disconnecting & reconnecting the battery it now runs fine. I wonder what could be the problem here? Airbag control module ...
|
| Brakes 98 Ram 1500 | 29 Mar 2005 03:33 GMT | 3 |
I've got to replace my brakes, but I've never done it on an ABS vehicle. Is there a trick I need to know? Phil
|
| Battery follow-up .. | 29 Mar 2005 03:28 GMT | 8 |
Well, I finally was able to check out the voltage on my battery ... Sorry for not having exact numbers, it's not a digital multimeter. Engine off, no accessories - ~12.5 Engine running - ~13
|
| Help in diagnosis code is P0302 | 28 Mar 2005 16:48 GMT | 5 |
Reader shows "Cylinder 2 misfire detected". I have changed: Spark plug, wires, cap, rotor, Injector and ran professional injection cleaner at the rail. I am still getting the code back after clearing it out. Could the rail be faulty? What the hell else could it be?
|
| Dodge ram 1500 4x4 parts | 28 Mar 2005 15:39 GMT | 1 |
Hi I am in the Ft Lauderdale area! I need a used passenger fender. A used passenger door and hinges. I also need the whole side of the passenger side bed. Inside the bed is not damaged.Any help? Thanks.Tom McSchell_Racing@webtv.net
|