I recently had my truck modified with a 3" lift kit unfortunately since the
modification two electrical problems, possibly related but not sure, soon
developed. First problem is my light for the air bag will not extinguish
and second, my cruise control will not engage nor will the ...

wheres the best/cheapest place to order husky floor liners for an '04 3500?
the kids are destroying the carpet and i gotta come up with something other
than making them ride in the bed.
thanks,

HELP
my 01 Quad cab 1500 has dampness on passenger side floor.  anyone else
seen this?
found cause?

Last Saturday Baylor hospital received permission from the FDA to do a
Eyelet Cell transplant.
http://www.bhcs.com/MedicalSpecialties/Transplantation/KP_isletcell.htm
Today on the Dallas news they are reporting she is doing fine and is now

Looking for a way to manage fuel and air flow in 2004 ram 1500 . Whats
available so that i can watch the performance of the truck , as i go
down the road , change if i need to improve performance ? I found a dash
mount from Apexi for my honda.

I saw the new Dodge Daytona truck the other day at the dealer. What a
nice color! It was called Go Man Go! Does anyone know what the paint
code would be for it?
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----

I've been dealing with this for a while and I'm very frustrated.
1992 Dodge W150, 318 magnum, auto trans
Most of the time, when I turn the key nothing happens, it's just dead.
After running the gear selector all the way up and down (anywhere from one

As the subject says,  truck has 230,000kms,  new plugs, wires, cap and
rotor.
If I let it get into overdrive at say 70-80 km/h (45-50 mph) it will
stumble/studder really bad,  a couple of times when cold/damp it backfired

I'm curious... how many miles have people been getting out of their
clutches?  Specifically, in Dakota trucks?
I have a '97 dakota cc, V6, 5 speed, 2 wheel drive, 3.21 gears, bought
new off the lot.  My original clutch has made it to 150,000 miles.

Does anyone know of a pad you can purchase that prevents your bedliner from
scratching the bed of the truck.  I understand they also allow moisture to
escape.

Replacing the front anti-sway bar bushings on my 2000 dodge 3500 Ram Van
with polyurethane ones has been on my to-do list for a while.  A couple of
days ago while browsing in Auto Zone, I picked up a pack of 1 1/4 inch
polyurethane bushings. On my way to the counter to pay for ...

I am thinking about installing nerf bars on my 05 3500 4 X 4.  Evidently the
vertical body mount bolts must be removed in order to bolt them on.  There
is no way to get to the nut if it exists; am I correct in assuming that this
nut is fused to the body above?

I have a few questions and descriptions of conditions about my
automatic transmission I'd like to get answers to, in general terms.
I have a Dodge 3/4 ton B250 van, 318 cu. in. engine.  The 3 speed with
overdrive on the column automatic transmission has been rebuilt and

What is the problem when the accelerater is barely pushed or let off the
vehicle jerks back a forth