I just finished installing Bilsteins on the rear of my 2000 Ram 3500 Van.
What bothers me is that the top bushings are so fat that the bolt doesn't
screw all the way thru the nut.  It lacks about an 1/16 inch of being level
with the nut. Its torqued down as tight as it can go, ...

I just installed EGT, Boost and Fuel Pressure gauges.  It isn't complete
yet, still need to connect the lights (+) to a dimmer source somewhere
(Help) and the EGT signal booster (+) somewhere.  I thought I read a
previous post where a dimmer wire behind the headlight switch is ...

I have a 03 Durango with 19000 miles about a month ago it started
hesitating and backfiring when cold. dealer first said it did not exist
now says my valves had carbon on them. The dealer cleaned them but it is
still having the same issue. the dealer says they have many of these ...

Hey everyone, been a while since I posted here but I need some help.  I just
bought traded my 98 dakota for an '05 4x4 quad cab and everything was great
with it until about a week ago I noticed that at high speeds (60+) when I
brake whether hard or gradually, The entire truck ...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7970834716
herrick78363@yahoo.com

I have a question that I can not find an answer to within this group or googled
on the web....  but, first the background of my question.
I am now retired and my wife and I want to travel.  We DO have the funds to
purchase a NEW Dodge w/Cummins to pull a 5th Weel (toy-box to carry ...

I just bought a used 2000 dakota qc,   :D   and when i open the
passenger door the courtesy lights don ?t work. Is this normal for the
truck ? If not where is the switch or sensor for the door located ??

I need some help diagnosing a problem with my wife's 98 Durango 4x4 with 360
and the selectable part time and full time transfer case.  Anyway, when
turning left or right or stopping or accelerating from a dead stop a popping
noise is coming from what feels like the steering ...

This was an e-mail I received, I removed the original and subsequent
headers to provide privacy to the senders, but there were thousands
of folks on it. I think this will work, if we can give it a chance.

About 55,000 miles. 5.9 liter engine.
I have started having problems recently. Sometimes, it would crank,
but would not start. Then, sometimes, if I "reboot" it by
disconnecting battery for a minute, then it starts. Also, recently

I got a 79 holiday rambler motorhome with a 440 dodge engine. How can I get
info so I can but parts and repair the engine? I need any help I can get!!!!
thnaks!!!!

Just got home from work a little bit ago. Was about 60 degrees today, a
little breezy and the sun was trying to come out. I saw two neighbors mowing
their grass near my home. What is wrong with this????? Yesterday it was 30
friggen degrees and a couple of inches of snow on the ...

   Saw this site http://speedbleeder.zoovy.com/ and would like any users
input - [good or bad] before I decide about a purchase. Gimmick, junk,
greatest thing since sliced bread? They also offer a stainless steel
"upgrade"? Any comments using stainless versus the original steel

http://wwwsg.daimlerchrysler.com/SD7DEV/GMS/TEMPLATES/GMS_PRESS_KIT/0,2970,0-1-6
2101-1-1-text-0-62097,00.html?
Note the horsepower and torque figures.  I think it'd look good under
the hood of a Dakota.  At least.
AP

Heya.. can I be helped??
   I have a 98 Dakota SLT, and I want to set up the door locks to auto lock
at 15mph/kph.  With taking to the dealer...
Has anyone been successful in doing this?