| Thread | Last Post | Replies |
|
| '03 Dodge Ram automatic "noise" | 25 Apr 2005 02:57 GMT | 8 |
Has anyone had a problem with the automatic used with the Hemi engine? By that I mean a failure of any sort. Mine has a sound I can best describe as sounding like a valve opening and closing rapidly. Happens when the transmission is close
|
| Dodge Ram QuadCab/Hemi, 4X4 | 25 Apr 2005 01:55 GMT | 1 |
I have a Dodge Ram QuadCab/hemi with 3300 miles. My problem is that it stalls out after I fill-up the gas tank. Usually within three blocks of the Gas station at a stop sign or light. This happens only once after refueling and has been doing this for about 14 of 16 fill-ups.
|
| keys for dodge trucks | 24 Apr 2005 17:03 GMT | 10 |
HI all, we all know you can reverse the key on the trucks either side up, but can you cut one pattern on one side of key, and different pattern on other side (for our other dodge), and still have the key work?? could use one key for both trucks this way??
|
| Vibration Gone!!!!!!!!!!! | 23 Apr 2005 12:48 GMT | 4 |
The driveline vibration at 65MPH that has been a more than irritating is no more. Over the past few days the service department had both driveshafts balanced. That removed some of it. Next they did the fix that has worked for a couple of folks on the TDR. They loosened the ...
|
| Gear change & speedometer adjustment | 22 Apr 2005 23:20 GMT | 1 |
When I changed rear gears in my old 94 Dakota I had to change a gear on a sensor in the transmission also but someone told me that you don't have to do that on the later models. I have an 04 now and am changing from a 3.55 to a 4.10. Do I have to do anything special like
|
| back door stuck shut | 22 Apr 2005 21:12 GMT | 3 |
HI all, we have a 1999 dodge 3/4 ton diesel cab and 1/2, rear door has just stuck shut..any ideas on how to open and fix?? (think it is the bottom latch that is not working) Thanks!
|
| Dakota-installing power windows in place of manual? | 22 Apr 2005 18:57 GMT | 4 |
Anyone here ever tried this? I am wondering if the doors are already equipped with the applicable harnesses to do this. If so it should be a farly simple job of installing the motor assemblies, I assume different regulators too, and the switches. And of course probably
|
| Dakota hemi? | 22 Apr 2005 14:58 GMT | 4 |
Does anyone know if the hemi or diesel will be an option on the Dakota next year?
|
| 88 Ram 50 Idler Pulley Failure | 21 Apr 2005 18:13 GMT | 6 |
I'm fooling with my neighbor's 1988 Ram 50 with the 2.0 liter Mitsu engine. Upon removing the timing belt cover, ball bearings fell over the floor. There are 2 belts under there. The main timing belt and pulleys are ok. There is a smaller toothed belt between the crank and what ...
|
| 99Durango speedometer not working | 21 Apr 2005 15:43 GMT | 2 |
Recently my Durango ABS & Brake light and check engine light came on. Speedometer would not register until over 20mph. I found out the rear wheel speed sensor needed to be replaced. I replaced relatively easy $20 part. Once installed the ABS & brake light went off but the check ...
|
| 96 2500 diesel with bad cruise control | 20 Apr 2005 02:15 GMT | 2 |
I have a 96 Dodge diesel 2500 with 97000 or so miles on it. Recently the cruise control quit working. It has been acting a little crazy for a while. I could set it at 65 mph and it would stay there for awhile then start creeping up to 70 and even 75. Can anybody get me started ...
|
| Disc Brake locking up on Right Front | 19 Apr 2005 22:02 GMT | 10 |
My 2000 Dodge Dakota Quad Cab has always had a vibration throughout the entire truck when braking. I was always told it is the roters. Today the right front disc brakes overheated while driving at highway speeds on level road.
|
| Durango fog lights wattage | 19 Apr 2005 08:57 GMT | 3 |
Can I put in aftermarket fog light assemblies rated at 55W in 99 Durango? Will relay & wiring take it? thx, Peter
|
| What did dealer break - Cruise not working after front end work | 18 Apr 2005 18:01 GMT | 20 |
Had problem with front end and they replaced main bearing, idler arm and couple other things on Steering. Now suddenly my cruise doesnt work. Coicidence or did they screw up.
|
| ANOTHER problem with Ram driveline? | 18 Apr 2005 17:30 GMT | 6 |
ok, I guess the Ram is going back to the dealer again.. (99 QQ 2wd 5.9/auto/3:55, LSD) The first time in, they changed the U-joints, rebuilt the rear end and changed a valve body in the tranny....
|